To Next PageTo Next Page
Need help?Do you have a question about the Bosch MRP23EVS and is the answer not in the manual?
General| Power | 2.3 HP |
|---|---|
| No-load speed | 10, 000 - 25, 000 RPM |
| Variable speed | Yes |
| Soft start | Yes |
| Type | Router |
| Voltage | 120V |
| Max. Motor HP | 2.3 HP |
| No Load Speed | 10, 000 - 25, 000 RPM |
| Cord Length | 10 ft |
| Collet size | 1/4 In. |
| Amperage | 15 Amps |
Keep work area clean and well lit, avoid explosive atmospheres, and keep children away.
Match plugs, avoid earthed surfaces, keep tools dry, use GFCI in damp locations.
Stay alert, use PPE, prevent unintentional starting, avoid overreaching, dress properly.
Do not force the tool, use correct tool for application, ensure switch works properly.
Use GFCI, rubber gloves, and footwear for enhanced personal safety.
Keep handles clean, develop maintenance schedule, and follow servicing guidelines.
Dust from construction can contain harmful chemicals; use ventilation and safety equipment.
Proper handling, workpiece securing, bit usage, and operational safety practices for routers.
Specific safety rules for setting up and operating routers with a router table.
Ensure secure motor mounting, check bit tightness, and use guards to keep hands safe.
Match bits to materials, use correct feed direction, and adhere to router table usage restrictions.
Explains symbols for Volts, Amperes, Hertz, Watts, Kilograms, Minutes, Seconds, Diameter, Speed.
Explains symbols for Off, Selector settings, AC/DC current, Class II, Earthing, Warning, Recycling.
Explains symbols for reading manual, wearing eye protection, and battery recycling.
Explains UL and recognized symbols indicating listing or recognition by UL.
Explains CSA and Intertek symbols for compliance with US and Canadian standards.
Explains NOM-ANCE symbol for compliance with Mexican standards.
Identifies key parts like air vents, sub-base, speed control, handles, and trigger switch.
Highlights the MR23EVS motor and its microfine depth adjustment control.
Identifies components of the plunge router including depth rod, plunge posts, and lock lever.
Details parts of the plunge base like the sub-base, plunge lock lever, and depth controls.
Step-by-step guide to insert and secure router bits using collet and shaft wrenches.
Instructions for safely loosening and removing a router bit from the collet chuck.
Guides for inserting and removing the motor from the fixed base.
Explains the micrometer fine adjustment and coarse adjustment for depth.
Details on using the fine adjustment knob, its range, and indicator ring.
Important notes on engaging macro lever, avoiding wedging, and using extensions.
Guides for inserting and removing the motor from the plunge base.
How to use the plunge lock lever to lower and raise the router bit for cutting.
Steps to set desired depth using the depth rod and stop turret for accurate cuts.
An alternative method for setting depth using a jig with the depth rod and turret.
Guidance on making multiple progressively deeper cuts for achieving desired depth.
How to precisely adjust router bit position after plunging using the fine adjustment knob.
Details on the indicator ring, increments, total range, and index marker for precise settings.
How to plug in the motor, the function of LEDs, and a warning about unplugging.
How to adjust speed using the control dial and a chart of settings for applications.
Details on cord swivel, soft start, and response circuitry.
Overview of the Bosch exclusive trigger control system in the base handles.
Instructions on how to use the trigger switch to turn the router on and off.
How to engage and disengage the lock-on button for continuous operation.
Proper methods for bringing router into/out of workpiece, and correct feeding techniques.
Advice on bit selection, troubleshooting, and how overload protection works.
Methods for guiding the router using straight edges or boards for accurate cuts.
How to attach and use the optional deluxe router guide for straight edges, circles, and arcs.
Explanation of Bosch quick-release templet guides and how patterns need offset compensation.
Step-by-step instructions for attaching the optional templet guide adapter.
Overview of the router's design for precise centering of sub-base and templet guides.
Step-by-step instructions for using the optional centering device to re-center the sub-base or guides.
Table showing recommended bit sizes for various Bosch templet guides based on internal diameter.
Information on an adapter for using conventional threaded templet guides with the Bosch system.
Instructions for attaching the fixed base to a router table mounting plate.
Steps to connect the router to the router table switch for operation.
Guidance on how to feed the workpiece correctly when using a router table.
General warnings and cautions for using dust extraction accessories.
How to attach the dust extraction hood to the plunge base.
Instructions for attaching dust extraction hoods to the fixed base, with or without adapter.
How to attach the edge-forming dust hood to the router base in various positions.
Guidelines for authorized service, brush inspection, and bearing replacement.
Safe cleaning methods, precautions, and recommendations for tool lubrication.
Recommendations for choosing the correct gauge and length of extension cords for safe tool operation.
Lists standard and optional accessories such as collet chucks, router guides, and dust extraction hoods.
Details the one-year limited warranty for Bosch portable and benchtop power tools.
Outlines what the warranty does not cover and limitations on implied warranties and damages.
