To Next PageTo Next Page
Need help?Do you have a question about the Bosch MRC23EVS and is the answer not in the manual?
General| Speed Range | 10, 000-25, 000 RPM |
|---|---|
| Voltage | 120V |
| No Load Speed | 10, 000 - 25, 000 RPM |
| Motor Power | 2.3 HP |
| Collet Size | 1/4 inch |
| Base Type | Fixed |
| Collet Capacity | 1/4 In. |
| Weight | 12.3 lb |
| Amperage | 15 Amps |
Guidelines for maintaining a safe and organized work environment to prevent accidents.
Precautions for safe use of electrical power tools, including grounding and cord safety.
Recommendations for operator safety, including PPE, alertness, and proper attire.
Advice on operating tools correctly, maintenance, and avoiding misuse.
Specific warnings regarding GFCI, AC/DC power, handling, maintenance, and potential chemical hazards.
Specific safety guidelines and precautions for operating routers on a router table.
Identification and description of key parts of the MRF23EVS fixed base router model.
Identification and description of key parts of the MRP23EVS plunge router model.
Step-by-step instructions for securely mounting and dismounting router bits.
Steps for mounting and dismounting the motor from the MRF01 fixed base.
Detailed guide on adjusting cutting depth using macro and fine adjustment mechanisms.
Specific instructions for using the fine adjustment knob for precise depth settings.
Steps for mounting and dismounting the motor from the MRP01 plunge base.
Guide on using the plunge mechanism for depth adjustment and base plunging action.
Using the fine adjustment mechanism after the plunge lock is set for precise bit positioning.
Techniques for making deep cuts and alternative methods for setting depth control.
How to adjust motor speed for different applications and materials for optimal performance.
Features that ensure smooth motor start-up and maintain consistent speed under load.
Explanation of the Bosch-exclusive trigger system, including on/off and lock-on functions.
Best practices for starting and finishing cuts for control and tool longevity.
Guidance on proper feed rates, common issues, and tips for effective routing.
How the tool's overload protection works and how to restart the motor after activation.
Using the optional deluxe guide for precise straight cuts, circles, and arcs.
Information on using templet guides for cutting patterns, designs, and inlays.
How to use the precision centering design and centering device for accurate alignment.
Steps for securely attaching the router base to a router table mounting plate.
How to connect the router to the router table's switch for operation.
Guidelines for safely feeding the workpiece when using a router table.
Using the dust extraction hood with the plunge base for dust collection during specific routing tasks.
How to install the dust extraction hood on the fixed base, with or without the templet guide adapter.
Attaching and using the edge-forming dust extraction hood for dust collection during edge operations.
Recommendations for professional service, carbon brush examination, and bearing checks.
Guidelines for cleaning the tool safely and information on tool lubrication.
