To Next PageTo Next Page
Need help?Do you have a question about the Bosch JS260 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Rating | 120 V |
| Weight | 4.4 lbs |
| Bevel Capacity | 45° |
| Max. Thickness in Mild Steel | 1/4 in |
| Orbital Action | Yes |
| Tool Type | Jigsaw |
| Blade Type | T-Shank |
| Dust Collection | Yes |
| No Load Stroke Rate | 500-3100 SPM |
General safety guidelines for the work environment, including cleanliness and avoiding explosive atmospheres.
Precautions regarding plugs, cords, and avoiding contact with grounded surfaces to prevent electric shock.
Measures for personal safety, including staying alert, using PPE, and preventing unintentional starting.
Guidelines for proper tool operation, maintenance, and handling to ensure safety and longevity.
Instructions on using clamps or other methods to secure the workpiece for stable cutting.
Warning against leaving the trigger locked 'ON' and how to safely disengage it.
Ensuring blades are sharp, undamaged, and all screws/holders are tight before use.
Mandatory use of safety goggles and optional dust masks for protection.
Guidelines for selecting and using appropriate extension cords to prevent hazards.
Information on chemicals in dust and precautions for reducing exposure.
Instructions for the tool-less system to change jigsaw blades.
Procedure to reset the blade clamp fingers for proper blade insertion.
How to control tool speed by adjusting pressure on the trigger switch.
Functionality of the 'Lock-ON' button for continuous operation.
Adjusting the blade's maximum stroke rate using the speed dial.
Factors influencing required cutting speed and motor cooling.
Adjusting blade orbit selector for maximum cutting efficiency based on material.
Using the insert to minimize splintering on the top surface of cut material.
Choosing appropriate blades for curves, finish, and maximizing blade life.
Advice on professional servicing and tool lubrication.
Maintenance of carbon brushes for motor efficiency.
When to replace noisy bearings to prevent overheating or motor failure.
Safety measures and caution regarding cleaning agents and solvents.
