To Next PageTo Next Page
Need help?Do you have a question about the Bosch POF 1400 ACE and is the answer not in the manual?
General| Product color | Aluminium, Black, Green, Red, White |
|---|---|
| Adjustable speed | Yes |
| Input power | 1450 W |
| Output power | 650 W |
| Power source | AC |
| Routing stroke | 55 mm |
| Collet capacity | 6, 6.35 (1/4\ |
| Vibration level | 6 m/s² |
| Idle speed (max) | 28000 RPM |
| Idle speed (min) | 11000 RPM |
| Vibration level uncertainty | 2 m/s² |
Weight and Dimensions| Weight | 3500 g |
|---|
Read all safety warnings and instructions to prevent electric shock, fire, or injury.
Ensure a clean, well-lit workspace and avoid explosive atmospheres.
Use correct plugs, avoid earthed surfaces, and protect the cord.
Stay alert, use PPE, prevent unintentional starting, and maintain balance.
Do not force the tool, use correctly, and maintain it for safe operation.
Hold by insulated surfaces, secure workpiece, use correct bit speed, and keep hands away.
For routing grooves, edges, profiles, and holes in wood, plastic, and light building materials.
Lists and numbers components of the router for identification.
How to insert and secure router bits, including safety precautions.
Connects extraction adapter and hose for dust removal.
Instructions for attaching the chip shield for safety.
How to switch the power tool on and off safely.
Adjusting the speed using the thumbwheel before or during operation.
Step-by-step guide for coarse adjustment of the cutting depth.
Procedure for turning the tool on and off, including safety notes.
Maintains constant speed under load for uniform performance.
Detailed steps for precise depth adjustment using specific controls.
General recommendations for safe operation and tool handling.
Correct feed direction against router bit rotation to prevent kickback.
Using a board or strip as a guide for large workpieces.
Using router bits with pilot or ball bearing for edge shaping.
Guiding the tool along a workpiece edge using the parallel guide.
Using the parallel guide to create circular arcs.
Using a curve guide for routing along workpiece edges.
Using a router compass for circular routing jobs.
Using a guide rail for straight routing cuts.
Using guide bushings for template and pattern routing.
Keep the machine clean, check ventilation slots, and use dust extraction.
