To Next PageTo Next Page
Need help?Do you have a question about the Bosch PLH181 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Type | Keyless |
| Weight | 1.5 kg |
| Max Drilling Capacity in Wood | 25 mm |
| Max Drilling Capacity in Steel | 10 mm |
| Max Drilling Capacity in Masonry | 10 mm |
| Chuck Size | 13 mm |
| Max Torque | 42 Nm |
| Battery Type | Lithium-Ion |
| Tool Weight | 2.9 lbs |
| Max. Torque Hard/Soft | 42 Nm |
| Max. Drilling Diameter Wood/Steel | 25 mm / 10 mm |
| Tool Length | 200 mm |
| Tool Width | 70 mm |
| Tool Height | 190 mm |
Indicates a hazardous situation resulting in death or serious injury if not avoided.
Indicates a hazardous situation resulting in death or serious injury if not avoided.
Indicates a hazardous situation resulting in minor or moderate injury if not avoided.
Ensures a safe environment by keeping the work area clean and free from hazards.
Guidelines for preventing electric shock and ensuring safe electrical connections.
Recommendations for operator alertness, protective equipment, and avoiding distractions.
Proper techniques and maintenance for safe and effective power tool operation.
Guidelines for safe charging, handling, and use of battery packs.
Instructions for tool servicing and ensuring safety of the power tool.
Ensuring the cutter stops before setting down and securing the workpiece.
Safe procedures for blade changes, alignment, and ensuring proper fit.
Proper grip, backward movement, and avoiding contact with moving parts.
Enhancing personal safety with devices like GFCI and appropriate footwear.
Understanding and mitigating risks from chemical exposure in dust from construction activities.
Identification of key parts like trigger switch, exhaust ports, and blade wrench.
Details on planing depth, rabbeting depth, and cutting width.
Temperature ranges for charging, operation, and storage of the tool.
Steps for correctly inserting and releasing the battery pack.
Safe procedures for handling, reversing, or replacing sharp planer blades.
Location and use of the blade wrench for adjustments.
Ensuring correct blade centering for proper planing action.
How to use the port selector and connect vacuum hoses for dust collection.
Purpose, positioning, and installation of guide fences for cut control.
How to attach and remove plastic overshoes for beveling edges.
Adjusting the guide fence to achieve the desired planing width.
How to turn the tool on and off using the lock-off button and trigger.
Understanding the electrical brake for quick blade stopping.
Proper techniques for holding the tool and feeding the workpiece for smooth cuts.
Using scrap wood to avoid divots at the end of workpiece planing.
Determining and adjusting cutting depth and feed rate based on material.
How to use the depth adjustment knob and scale for precise settings.
Using V-grooves in the base plate for easy beveling of workpiece edges.
Using the accessory to set and achieve desired rabbeting depths.
Steps to clear clogs in the shavings exhaust system.
Recommendations for professional servicing and using genuine replacement parts.
Recognizing signs of battery end-of-life and the need for replacement.
How to inspect, replace, and install a new drive belt for optimal performance.
Warnings about cleaning agents and keeping ventilation openings clear.
