To Next PageTo Next Page
Need help?Do you have a question about the Bosch PTK 19 E and is the answer not in the manual?
General| Type | Tacker |
|---|---|
| Weight | 1.6 kg |
| Staple Type | Type 53 |
| Staple Length | 6-14 mm |
| Nail Length | 15-25 mm |
| Magazine Capacity | 100 staples |
| Voltage | 230 V |
| Power | Electrical |
| Impact rate | 30 bpm |
Covers safe operation, mains cable integrity, and residual current device usage for secure handling.
Includes securing workpieces, avoiding body contact, not fastening wiring, and prohibiting children's use.
Ensures compatibility of staples, nails, and pins with the tacker's precision components for proper operation.
Step-by-step guide for inserting staple or nail strips into the magazine slider and securing it.
Verify that the power source voltage matches the machine's nameplate for safe and correct operation.
Explains how the trigger lock prevents accidental firing of staples or nails.
Details on sliding the safety cover for operation and securing it during pauses and transport.
Table and explanation for adjusting hammer force based on staple length and material type.
Minimizing impact striker wear by avoiding blank shots and excessive hammer force.
Guidance on the correct positioning and use of the safety cover during operation and pauses.
Specific instructions for using 19mm resin-covered staples and positioning for wood clamps.
Advice on starting with low hammer force to prevent surface marks on laths and strips.
Step-by-step guide to safely remove jammed staples by disassembling the face plate.
Recommendation to pause operation for cooling after a maximum of 15 minutes of continuous use.
Using extension cables with at least 1.5 mm² cross-section and a maximum length of 10 metres.
Keeping the machine and ventilation slots clean for safe and proper working.
Instructions for repairs to be carried out by authorized after-sales service centers.
Guidance on connecting a 3-pin plug to a 2-wire cable using specified wire colours.
Important note regarding safe disposal of moulded plugs removed from the cable.
Instructions for sorting machine, accessories, and packaging for environmentally-friendly recycling.
Information on finding exploded views and spare parts via the www.bosch-pt.com website.
