To Next PageTo Next Page
Need help?Do you have a question about the Bosch JS470E and is the answer not in the manual?
General| Strokes per Minute | 500 - 3, 100 SPM |
|---|---|
| Voltage | 120V |
| Amperage | 7.0 Amps |
| Bevel Angle Range | 0° to 45° |
| Cord Length | 10 ft |
| Stroke Length | 1 inch |
Read all safety warnings, instructions, and specifications for safe operation.
Match plugs to outlets, avoid body contact with grounded surfaces, protect from water.
Stay alert, use PPE, prevent unintentional starting, use common sense.
Use PPE, prevent unintentional starting, manage cord safely, dress properly.
Hold tool by insulated surfaces to prevent electric shock from live wiring.
Avoid drilling into walls with potential wiring; disconnect power if unavoidable.
Ensure trigger is off before plugging in; prevent accidental start-ups.
Do not reach under material; hand proximity to blade is hidden.
Use sharp, undamaged blades to prevent breakage or kickback.
Always wear safety goggles and a dust mask/respirator when needed.
Be aware of health risks from dust containing chemicals; use ventilation and safety equipment.
Step-by-step guide for installing and removing jig saw blades.
How to use the variable speed dial to adjust blade stroke rate.
How the variable speed trigger switch controls speed on JS470E.
How to adjust the blade orbit for different materials and cuts.
Guidance on choosing the right blade for different cutting tasks and materials.
