What to do if my Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE'?
If your Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE', it means the scale is switched on while the appliance is running. To resolve this, switch the appliance off and wait until it stops before using the scale.
What to do if my Bosch Kitchen Appliance switches off during use?
Your Bosch Kitchen Appliance might be switching off during use due to several reasons: * Too much food being processed at once or for too long. To resolve this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and allow the appliance to cool down to room temperature. * The swivel arm was opened. To fix this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks into place. * The bowl or bevel gear (accessory) has become loose. To correct this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear and close the locking lever completely.
Why does my Bosch Kitchen Appliance display 'ERROR MOTOR OVERLOAD'?
The 'ERROR MOTOR OVERLOAD' message on your Bosch Kitchen Appliance indicates: * Too much food has been processed at once or for too long. To resolve this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and allow the appliance to cool down to room temperature. * The appliance or an accessory is blocked. To fix this, turn the rotary switch to 'y', disconnect the mains plug, and check and clear any blockages in the appliance or accessories. * The scale is exposed to vibrations. Do not use the appliance on worktops when e.g. a dishwasher is running underneath.
What to do if my Bosch Kitchen Appliance shows 'ERROR CHECK BOWL'?
If your Bosch Kitchen Appliance displays 'ERROR CHECK BOWL', it means the bowl or bevel gear (accessory) has become loose. To fix this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear and close the locking lever completely.
What does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Kitchen Appliance?
The 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' message on your Bosch Kitchen Appliance indicates that the measurement result is outside the scale's range (-990 g to 5000 g). To resolve this, do not add more than 5000 g of ingredients or remove more than 990 g of ingredients.
What does 'ERROR ARM OPEN' mean on my Bosch Kitchen Appliance and how to fix it?
The 'ERROR ARM OPEN' message on your Bosch Kitchen Appliance means the swivel arm was opened. To fix this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks into place.
Why won't the swivel arm on my Bosch Kitchen Appliance open?
The swivel arm on your Bosch Kitchen Appliance may not open because an accessory is fitted to the red rear drive. To open it, remove the accessory, press the release button, and then open the swivel arm.
Why does my Bosch Kitchen Appliance not show weight changes when adding ingredients?
Your Bosch Kitchen Appliance may not show weight changes because the quantity of added ingredients is less than 5 grams (0.01 lb). Add at least 5 grams (0.01 lb) for the scales to provide correct measurements.
What does 'OVERLOAD or UNDERLOAD' mean when using SensorControl Plus on my Bosch Kitchen Appliances?
The message 'OVERLOAD or UNDERLOAD' when using SensorControl Plus on your Bosch Kitchen Appliance indicates that too much or too little of the ingredients was added for the selected program. Add ingredients according to the specified quantities.
Why can't I start SensorControl Plus on my Bosch Kitchen Appliance, and it says “ADD INGREDIENTS” even after adding them?
If you can't start SensorControl Plus on your Bosch Kitchen Appliance and it displays “ADD INGREDIENTS” even after you've added them, it's likely that the ingredients were added before the scales were activated. To fix this, empty the bowl, select the program again, and only add ingredients after the program has been selected and the scales show “0 g” or “0.00 lb” (depending on setting) or “ADD INGREDIENTS” appears on the display.
Details on the appliance's purpose for domestic use and processing limits.
Crucial safety information including electrical hazards and general precautions.
Safety warnings related to physical harm, suffocation, and general operational cautions.
Introduction to the appliance, its parts, and initial setup procedures.
Identification of appliance parts, drives, and control panel elements.
Details on drives, colour coding, and protective covers for appliance parts.
Explanation of display, function buttons, rotary switch, and settings.
Covers tool descriptions, recommended speeds, and procedures for attachment and adjustment.
Steps for preparing the appliance and configuring its settings for optimal use.
Instructions for basic appliance use, including ingredient addition and safety.
Using the TIME function for elapsed duration and TIMER for setting a required duration.
How to select and use automatic programmes like CREAM, EGG WHITE, YEAST DOUGH.
Instructions for weighing ingredients and pre-setting weights using the appliance scales.
Guidelines for cleaning the appliance base unit, bowl, and tools.
Includes recipes for Whipped cream, Egg whites, Sponge mixture, and Cake mixture.
Explanation of safety features and how to re-adjust appliance tools.
Guidance on identifying and fixing common appliance problems and errors.
Information on product disposal, warranty, and available accessories.
Overview of available accessories, their descriptions, and how to obtain them.
To Next Page
General
