Need help?Do you have a question about the Bosch MUZ5FW1 series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | MUZ5FW1 series |
| Category | Kitchen Appliances |
| Language | English |
Provides essential safety precautions and warnings for using the mincer attachment.
Advises against reaching into the feed tube and handling the mincer while in operation.
Key points on correct assembly and usage of the mincer attachment.
Lists and identifies the various parts of the mincer attachment (Figure A).
Details additional attachments available for the food processor.
Illustrates the correct operating position for the mincer attachment (Figure B).
Explains the driver's notch as a breaking point for overload protection.
Step-by-step guide to replace a broken driver after an overload.
Guides on assembling the mincer attachment and connecting it to the drive.
Details how to process food, use the pusher, and set the rotary knob.
Instructions for switching off, removing the mincer, and cleaning.
Advises against abrasive cleaners and dishwasher use for mincer parts.
Provides instructions for rinsing and drying mincer parts by hand.
General warning for assembling accessories without blades and following safety guidelines.
Instructions for using the fruit press for berries, tomatoes, and rosehips.
Instructions for using the attachment to shape biscuit dough or short pastry.
Instructions for grating almonds, nuts, and dried bread with the attachment.
Cautionary note for processing only dry nuts and almonds in small quantities.
For shaping biscuit dough or pastry dough.
For grating almonds, nuts, and dry bread or bread rolls.
Instructions for cleaning the mincer before the initial use.
Steps for assembling the mincer attachment and connecting it to the drive unit.
Guide for using the juice extractor for fruits and berries.
Instructions for using the accessory with the MUM5 food processor.
Warnings about touching the feed tube and handling the mincer while in motion.
Key points for correct assembly and ensuring all parts are securely fitted.
Explains the mechanism to prevent damage from overloading the appliance.
Instructions on how to replace the drive gear if it breaks due to overload.
Diagram showing the components of the mincer attachment (Figure A).
Diagram showing the parts of the mincer attachment and accessories (Figure B).
Provides contact numbers for advice and repair requests in Germany, Austria, and Switzerland.
Details of Robert Bosch Hausgeräte GmbH, including address and website.
To Next Page
