English–4
1 270 020 XBN | (12.5.16) Bosch eBike Systems
Registration via smartphone and Bluetooth® connection
A smartphone is not included in the delivery. To register with
the smartphone internet connection is required, which, de-
pending on the contract, can generate costs at your telephone
provider. For the synchronization of data between the smart-
phone and online portal an Internet connection is also required.
To make use of the full range of functions provided by your on-
board computer, you need a smartphone with the Android op-
erating system, version 4.0.3 or a later version, or iOS 8 or a
later version. A list of tested/approved smartphones, can be
found in the online manual under
“www.Bosch-eBike.com/nyon-manual”.
Smartphones with the above mentioned operating systems,
which are not included in the list can be connected under cer-
tain circumstances with the on-board computer. However, a
complete compatibility of the on-board computer with the
smartphones not listed, can not be guaranteed.
Download the application “Bosch eBike Connect” to your
smartphone from the App Store for Apple iPhones and Goog-
le Play Store for Android devices.
Start the application “Bosch eBike Connect” and follow the
instructions. Detailed instructions can be found in the online
manual under “www.Bosch-eBike.com/nyon-manual”.
If the application “Bosch eBike Connect” is active and there
is a Bluetooth® connection to your on-board computer, data
between on-board computer and smartphone will sync auto-
matically.
Online registration
Internet access is required for online registration.
Open the online portal “Bosch eBike Connect” with your
browser under “www.eBike-Connect.com” and follow the
instructions. Detailed instructions can be found in the online
manual under “www.Bosch-eBike.com/nyon-manual”.
Displays and configurations of the on-board
computer
Note: All interface displays and interface texts on the follow-
ing pages correspond to the release status of the software.
Since the Nyon software is updated a number of times a year,
the interface displays and/or interface texts may change
slightly after an update.
Operating logic
A change in the display can be achieved during the trip via the
operating unit 10. This way both hands can stay on the han-
dlebars while cycling.
With the control elements on the on-board computer, you
have the following options:
– Switch the on-board computer on or off using the On/Off
button 5.
– The default mode of operation in “Settings”>“My Nyon”
can be reached via the “Home” (2 or 12) button.
– The bike lights can be switched on or off using the bike light
button 6.
– Use the joystick 1 to navigate through the respective oper-
ating modes. Make a selection by pressing the joystick 1.
Press left on the joystick 1 to overlay the active operating
mode with the main menu and to switch it to the main menu
(see picture above).
If you press the joystick 1 right while in the active operating
mode, the current screen is overlayed with the potential con-
figuration options of the current operating mode. Move the
joystick to the desired option and select it by pressing the joy-
stick 1.
Tip: If you are in an active operating mode, you can switch di-
rectly to the next operating mode by pressing the joystick 1 up
or down.
If Nyon is on the eBike, “Ride” is displayed after switching on
the operating mode. If Nyon is not mounted on the eBike,
“Dashboard” is displayed on the operating mode.
Map & Navigaon
OBJ_BUCH-2616-002.book Page 4 Thursday, May 12, 2016 12:37 PM
To Next Page
Loading...
