Do you have a question about the Bosch OBD 2220 INFO SCAN and is the answer not in the manual?
User must read and understand the guide before operating the tool.
Safety messages help prevent injury and damage, categorized by signal words.
Warnings about electric shock, poisoning from exhaust, and protective gear.
Precautions against fire hazards, burns from hot components, and flying particles.
Further details on poisoning risk from exhaust and handling of battery acid.
Warnings about engine compartment, movement, airbags, and operational cautions.
Overview of the scan tool's purpose and manual content.
Instructions for downloading and installing the PC application for updates.
Explanation of On-Board Diagnostics II standards and capabilities.
Information on SAE standards related to OBDII communication protocols.
Details on the physical DLC connector and its pin assignments.
Explanation of DTC structure, types, and examples.
Introduction to the scan tool's physical components and buttons.
Technical specifications including display, operating temperature, and power requirements.
Details on the LCD display and special characters used by the tool.
Explanation of how to use the scan tool's keypad for navigation.
Information on powering the tool via vehicle or USB connection.
Overview of the System Setup options available in the diagnostic menu.
How to change measurement units (e.g., English/Metric).
How to change the scan tool's display language.
Option to enable/disable scrolling of full Parameter ID names.
Viewing serial number, software version, and other tool details.
Procedure to test the scan tool's display for functionality.
Verifying the functionality of each key on the scan tool.
Testing the tool's RAM and flash ROM for errors.
Using Program Mode for updating the scan tool software.
Viewing information from previously tested vehicles.
How to record and play back PIDs for diagnosing intermittent issues.
Looking up definitions of Diagnostic Trouble Codes (DTCs).
Guidance on finding the vehicle's DLC port.
Step-by-step instructions for connecting the scan tool to the vehicle.
Procedures for selecting the correct vehicle for diagnosis.
Viewing acronyms and abbreviations used by the scan tool.
Finding vehicle-specific locations of components.
Viewing emissions system monitor status for vehicles.
Retrieving Diagnostic Trouble Codes (DTCs) from vehicle modules.
Deleting DTCs and resetting I/M monitor data.
Checking the status of the Malfunction Indicator Lamp (MIL).
Displaying basic status of the vehicle's OBD system.
Real-time viewing of vehicle parameter identification (PID) data.
Recording PIDs to diagnose intermittent driveability problems.
Viewing snapshot of operating conditions during emission faults.
Monitoring real-time emissions system operations.
Retrieving completed O2 sensor monitor test results.
Viewing test results for emission-related components not continuously monitored.
Controlling vehicle components and systems for testing.
Measuring DLC voltage to assess battery, starter, and alternator performance.
Requesting VIN, calibration IDs, and other vehicle data.
Steps to resolve common error messages displayed by the scan tool.
Troubleshooting steps for when the scan tool fails to power on.
Addressing issues where the vehicle's control module is unresponsive.
Handling errors when the vehicle's computer stops communicating with the tool.
Performing self-tests for the display, keys, and memory.
Providing contact information for customer support and repair services.
Definitions for Parameter IDs from A to ACC.
Definitions for Parameter IDs from CALC LOAD to EOT.
Definitions for Parameter IDs from EGR to VGT_B_STAT.
Definitions for glossary terms starting with A/C through Brake Switch.
Definitions for glossary terms starting with CAM through DTC.
Definitions for glossary terms starting with EPA through ISC.
Definitions for glossary terms starting with NOx through PCM.
Definitions for glossary terms starting with Solenoid through WOT.
Statement of compliance with European RoHS Directive 2011/65/EU.
Statement of compliance with EMC directive 2014/30/EU.
Details of the warranty coverage, limitations, and disclaimers.
Terms regarding the proprietary and confidential nature of the unit's software.
Information on how to get help and service for the product.
Instructions for disposing of the product according to local regulations.