18. INSTALLATION
• parameter [4.5] >Automatic calibration of wheel circumference: If the bike is stopped, the
message 55.6 will appear on the display for a few seconds, at the end of calibration 50.1
appears. If the bike is moving orthe magnet on the spokes is positioned above the sensor,
calibration is NOT STARTED and 99.9 appears on the display;
• parameter[5.5] >restores km traveled with active unlock, if the operation has been carried
out correctly, 50.0 will appear on the display;
parameter[6.5] > software version.
• parameter[7.5] > speed sensor setting: if you have a 2020 e bike with wheel frame speed
sensor magnet set parameter 1.1, if you have a 2020 e bike with disc speed sensor sensor
magnet set parameter 2.2
PURION
To Next Page
Loading...
Need help?
General