English–6
Bosch eBike Systems 0 275 U07 XCX | (25.4.17)
Technical Data
Operation
Initial Operation
Connecting the Charger to Household Electricity
Note the household voltage! The voltage of the power
supply must correspond to the specifications given on
the battery charger nameplate.
Plug the charger plug 3 of the power cord into the charger
socket 2 of the charger.
Connect the power supply cable (country-specific) to the
household electricity supply.
Use only the supplied input connection: standard AC power
cord (3 in the diagram) when connecting to the household
electrical supply.
Battery Charger Wide Range Charger (36–4/100-230) Compact Charger (36–2/100-240)
Article number 0 275 007 906 0 275 007 915
Rated voltage
V~ 90...264 90...264
Frequency
Hz 47...63 47...63
Output voltage
V3636
Charging current A42
Charging time, approx.
– PowerPack 400
– PowerPack 500
h
h
3.5
4.5
6.5
7.5
Operating temperature °F +32...+104 +32 ...+104
Storage temperature °F +14...+122 +14 ...+122
Weight, approx. lb 1.8 1.3
Degree of protection IP 40 IP 40
Power cord
Article number 1 270 020 343
Rated·voltage –Cable
V~ 300
Rated·voltage –Connectors/
plug-in·connectors
V~ 125
Rated·current – Connectors/
plug-in·connectors
A10
Material –Cable PVC
Safety standard –Cable UL62
Safety standard –Connectors/
plug-in·connectors UL817
Length, approx. m 1.8
OBJ_BUCH-2453-004.book Page 6 Tuesday, April 25, 2017 11:22 AM