Need help?Do you have a question about the Bosch PEX 400 A and is the answer not in the manual?
General| Power | 350 W |
|---|---|
| Sanding pad diameter | 125 mm |
| No-load speed | 12, 000 rpm |
| Oscillating circuit diameter | 2.5 mm |
| Orbital stroke rate | 4000 - 21200 opm |
Guides selection of sanding plates based on material and desired finish (soft, medium, hard).
Step-by-step process for removing and attaching the sanding plate using the Allen key.
Recommends sanding sheet grit based on the material being worked (wood, paint, stone).
Details health risks of dust, necessity of extraction, and potential fire hazards.
Instructions for attaching and using the integrated dust box system for dust collection.
Procedure for safely removing and cleaning the dust box and filter element.
Guidance on connecting and using an external vacuum cleaner via an adapter.
Verify power source voltage matches the machine's nameplate for safe operation.
Steps for turning the machine on, off, and locking the switch.
Instructions for attaching and adjusting the auxiliary handle for better control.
Explains the function of the brake and when replacement is necessary.
Guidelines for applying pressure, sanding patterns, and determining speed.
Utilizing coarse grit sandpaper and light pressure for effective material removal.
Employing fine grit sandpaper with moderate pressure for finishing.
Using the sander with a polishing tool, selecting low speed, and applying polish.
Recommended method for washing polishing tools with mild detergent and water.
Important instructions for connecting a new 3-pin plug to the 2-wire cable.
Guidelines for environmentally-friendly recycling of the machine, accessories, and packaging.
To Next Page
