Bosch PKF375FP2E - Childproof Lock; Time-Setting Options

Childproof lock en
9
Requirement:With dual-circuit hotplates, the second
filament circuit has to be activated for use with the
PowerBoost function.
1.
Use
or to select the hotplate.
2.
Set power level 9.
3.
Press power level 9 again.
a The
display lights up.
6.2 Switching off PowerBoost
If you do not switch off the PowerBoost function, the
PowerBoost function is automatically switched off after
a certain period of time. The hotplate switches back to
power level 9.
1.
Use
or to select the hotplate.
2.
Select any ongoing power level.
a The
display goes out.
7 Childproof lock
You can use the childproof lock to prevent children
from switching on the hob.
7.1 Activating the childproof lock
Requirement:The hob is switched off.
▶
Press and hold
for approx. 4seconds.
a lights up for approx. 10seconds.
a The hob is locked.
7.2 Deactivating the childproof lock
Requirement:The hob is switched off.
▶
Press and hold
for approx. 4seconds.
a The lock is released.
7.3 Automatic childproof lock
This function automatically activates the childproof lock
when you switch off the hob.
The automatic childproof lock can be activated in the
basic settings. →Page11
8 Time-setting options
Your appliance has different time-setting options which
can be used to set a cooking time or a kitchen timer.
8.1 Cooking time
Enter a cooking time for the relevant hotplate. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can set a cooking time of up to 99 minutes.
Setting the cooking time
1.
Use
or to select the hotplate.
2.
Set the required power level.
3.
Press twice.
a lights up.
a
min. lights up on the timer display.
4.
Within the next 10seconds, set the required cook-
ing time on the control panel.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the selected hotplate is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and
flashes on the
display for 10seconds. The display flashes.
Changing or cancelling the cooking time
1.
Use
or to select the hotplate.
2.
Press twice.
3.
On the control panel, change the cooking time or
set it to ⁠ ⁠.
Switching off the continuous signal
You can switch the signal off manually.
▶
Press any touch field.
a The displays go out and the signal tone stops.