Bosch PKS 55-2 A PKS 66 A - Technical Specifications; Noise and Vibration Data

(29)
Cut mark 45°
(30)
Cut mark 0°
(31)
Guide rail
A)
(32)
Button for guide rail locking mechanism
(33)
Screw clamp
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Hand-held circular saw PKS 55 PKS 55 A
PKS 55-2 A
PKS 66 A
PKS 66 AF
A)
PKS 66-2 AF
A)
Article number
3 603 E00 0.. 3 603 E01 0.. 3 603 E02 0..
Rated power input W 1200 1200 1600
No-load speed 5600 5600 5000
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
mm
mm
55
38
55
38
66
48
Spindle lock ● ● ●
CutControl – ● ●
Dust/chip box – ● ●
Base plate dimensions mm 288 x 153 288 x 153 327 x 160
Max. saw blade diameter mm 160 160 190
Min. saw blade diameter mm 150 150 184
Max. base blade thickness mm 1.8 1.8 1.8
Locating bore mm 20 20 30
Weight according to
EPTA-Procedure 01:2014
kg 3.9 3.9 5.4
Protection class / II / II / II
A) PKS 66 AF/PKS 66-2 AF with guide rail
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Turn-on transients cause brief drops in voltage. Other tools may be adversely affected by these if the conditions in the electricity supply are unfa-
vourable. Malfunctions are not expected if the impedances in the electricity supply are below 0.36 ohms.
Noise/Vibration Information
Noise emission values determined according
toEN62841-2-5.
Typically, the A-weighted noise level of the power tool is:
PKS 55:
Sound pressure level 92dB(A); sound power level
103dB(A). Uncertainty K = 3 dB.
PKS 66:
Sound pressure level 93dB(A); sound power level
104dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according toEN62841-2-5:
Sawing wood: a
h
= 4.0 m/s
2
, K = 1.5 m/s
2
Sawing metal: a
h
= 3.0 m/s
2
, K = 1.5 m/s
2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
English | 17
Bosch Power Tools 1 609 92A 4FT | (20.08.2018)
min
-1