To Next PageTo Next Page
Need help?Do you have a question about the Bosch PKS 55 and is the answer not in the manual?
General| Power | 1200 W |
|---|---|
| No-load speed | 5600 rpm |
| Saw blade diameter | 160 mm |
| Cutting depth at 90° | 55 mm |
| Cutting depth at 45° | 38 mm |
| Weight | 3.9 kg |
| Bore diameter | 20 mm |
| Cord Length | 2.5 m |
Read all safety warnings and instructions to prevent shock, fire, or injury.
Keep work area clean, well lit, and free from explosive atmospheres. Ensure children/bystanders are kept away.
Match plugs to outlets, avoid body contact with earthed surfaces, protect from rain/wet conditions.
Stay alert, use PPE, avoid operating while tired or under influence of drugs/alcohol.
Specific safety precautions and warnings for operating circular saws, including kickback.
Ensure the lower guard operates freely and correctly for safe operation and protection.
General safety advice, including avoiding overhead work and using utility detectors.
Follow instructions for safe operation, tool maintenance, and accessory use to prevent accidents.
Ensure tool longevity and safety by having it serviced by qualified personnel with identical parts.
For lengthways/crossways cutting of wood and mitre cuts. Not for ferrous metals.
Lists and identifies key components and functionalities of the circular saw.
Details article number, power, speed, cutting depth, dimensions, weight, and protection class.
Presents measured sound and vibration levels according to EN standards for user safety.
Instructions for safely removing and installing saw blades, including precautions.
Guidance on choosing appropriate saw blades from recommendations provided.
Covers setup and use of external or integrated dust collection for safety and cleanliness.
Overview of different ways to use the circular saw for various cutting tasks.
Steps for setting the correct cutting depth and bevel angle for accurate cuts.
Using cutting marks and guides for precise straight and angled cuts.
Procedures for safely starting, stopping, and operating the power tool.
Guidance on proper sawing techniques, blade selection, and material considerations for wood.
Instructions for safely cutting non-ferrous metals, emphasizing blade selection and feed.
Using the parallel guide for precise edge cuts and cutting strips of uniform dimension.
Using the guide rail for accurate straight cuts and mitre cuts with splinter protection.
Guidelines for keeping the machine clean, ensuring guard mobility, and blade care.
