English | 25
Bosch Power Tools 1 609 929 W57 | (14.7.10)
Assembly
Inserting/Replacing the Battery
(see figure A)
Alkali-manganese batteries are recommended for the
measuring tool.
To open the battery lid 11, press the latch 10 in the di-
rection of the arrow and remove the battery lid.
Place the battery-recovery ribbon under the first bat-
tery being inserted. Insert the supplied batteries in the
sequence shown in the figure, paying attention to the
correct polarity.
Always replace all batteries at the same time. Only use
batteries from one brand and with the identical capacity.
f Remove the batteries from the measuring tool
when not using it for extended periods. When stor-
ing for extended periods, the batteries can corrode
and discharge themselves.
OBJ_BUCH-311-005.book Page 25 Wednesday, July 14, 2010 11:45 AM
To Next Page
Loading...
