To Next PageTo Next Page
Need help?Do you have a question about the Bosch PCL 20 and is the answer not in the manual?
General| Type | Line level |
|---|---|
| Product color | Black, Green |
| Tripod thread | 1/4 \ |
| Tripod mounting supported | Yes |
| Laser class | 2 |
| Laser diode | 635 nm (\u003C 1 mW) |
| Maximum range | 10 m |
| Color of laser beam | Red |
| Leveling accuracy (±) | 0.5 mm/m |
| Self-leveling range (±) | 4 ° |
| Battery type | AA |
| Operating time | 35 h |
| Battery voltage | 1.5 V |
| Battery technology | Alkaline |
| Number of batteries supported | 4 |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 5 - 40 °C |
Weight and Dimensions| Depth | 123 mm |
|---|---|
| Width | 67 mm |
| Height | 110 mm |
| Weight | 480 g |
The measuring tool is intended for determining and checking horizontal and vertical lines as well as plumb points.
Instructions for opening the battery lid, inserting/replacing batteries, and proper storage to prevent corrosion or self-discharge.
Protect the tool from moisture, direct sunlight, and extreme temperatures. Avoid heavy impacts and secure during transport.
How to switch the measuring tool on and off using the On/Off switch. Notes on laser beam safety when operating.
Explains how to change operating modes by pressing the 'Mode' button and indicates the corresponding illuminated operating-mode indication.
Using a tripod offers a stable, height-adjustable support. Mount the tool using the tripod mount and screw the locking screw.
Instructions for securely attaching the tool at any height using the wall mount, including height adjustment and fastening.
How to improve plumb beam visibility by using the wall mount as a table stand, with detailed steps for setup.
Information on laser viewing glasses, their function, and important safety warnings regarding their use as safety goggles or sunglasses.
Guidelines for storing, cleaning, and maintaining the measuring tool, including advice on avoiding water and using soft cloths.
Information on how to contact customer service for maintenance, repair, spare parts, and product application questions.
