To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLL50-20 and is the answer not in the manual?
General| Laser Diode | 635 nm |
|---|---|
| Leveling Type | Self-leveling |
| Range | Up to 50 ft |
| Working Range | 50 ft |
| Self-Leveling Range | ±4° |
| Power Source | Battery |
| Power Supply | 4 x AA Batteries |
| Battery Type | AA |
| Weight | 0.9 Lb |
| Mount Threading | 1/4-20 |
| Protection Class | IP54 |
| Type | Line |
| Laser Class | Class II |
| Accuracy | ±3/16-in @ 30-ft |
| Operating Temperature | 14° F - 122° F |
| Storage Temperature | -4°F to 140°F |
| Leveling Time | 4 s |
Definitions for DANGER, WARNING, and CAUTION safety alert symbols.
Instructions to prevent eye injury from laser beam exposure.
Covers safe handling, charging, and storage of battery packs and the tool.
Ensures a safe environment by addressing lighting, children, and weather conditions.
Addresses hazards related to batteries, short circuits, and charging.
Recommendations for eye protection, alertness, and avoiding hazardous conditions.
Warnings about magnetic field effects on medical devices and data storage.
Guidance on proper tool usage, maintenance, and repair.
Information on radio frequency interference and compliance with FCC rules.
Details on compliance with Industry Canada's licence-exempt RSS standards.
Details on working range, accuracy, temperature, and laser class for GLL50-20/20G.
Information on Li-ion battery packs and recommended power adaptors.
Describes the tool's purpose for determining and checking horizontal and vertical lines indoors.
Lists and identifies all parts of the laser tool with corresponding numbers.
Instructions for using standard LR6 (AA) batteries.
Guidelines for Bosch rechargeable lithium-ion battery packs and charging.
Initial setup, safety warnings, and switching the tool on/off.
Explains how the automatic leveling compensates for slight inclines.
Factors affecting accuracy, such as ambient temperature and impacts.
Procedure to check the horizontal line's height accuracy.
Procedure to check the horizontal line's level accuracy.
Procedure to check the vertical line's level accuracy.
Advice on using the center of the laser line for marking.
Instructions for attaching and using the magnetic rotating mount.
Information on using optional tripod and laser viewing glasses.
Guidelines for keeping the tool clean and performing basic maintenance.
Instructions for recycling batteries and packaging.
Information on the one-year limited warranty and optional extended coverage.
Steps for obtaining a refund, replacement, or warranty service.
