To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLL25-10 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GLL25-10 |
| Category | Laser Level |
| Language | English |
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Batteries can explode or leak, cause injury or fire. Follow all instructions and warnings on the battery label.
If laser radiation strikes your eye, close eyes and turn head away. Do not modify the laser equipment.
Keep tools away from pacemakers and magnetic data media to prevent interference or data loss.
Audio signal level is 80dB(A) at one meter. Do not hold the measuring tool close to your ear.
Use the correct tool for your application. The correct tool will do the job better and safer.
Have your tool serviced by a qualified repair person using only identical replacement parts.
Use only alkaline batteries. Pay attention to correct polarity when inserting batteries.
Protect tool from moisture and extreme temperatures. Allow tool to adjust to ambient temperature before operation.
Do not leave the tool unattended when switched on. Switch off after use to prevent blinding others.
The measuring tool determines and checks horizontal and vertical lines in enclosed working sites.
Tool automatically compensates irregularities within ±4°. Leveling is finished when laser beams stop moving.
Fasten tool to objects 1/2-2/8 inches thick. Mount device and screw tool onto 1/4-20 male thread.
Use tripod for stable, height-adjustable support. Place tool via mounting thread onto tripod's 1/4-20 male thread.
Glasses filter ambient light, making red laser appear brighter. Do not use as safety goggles.
Return tool within 30 days of purchase to dealer for full refund or replacement with original receipt.
