Need help?Do you have a question about the Bosch GLL40-20G and is the answer not in the manual?
General| Laser Color | Green |
|---|---|
| Self-Leveling Range | ±4° |
| Mount Threading | 1/4-20 |
| Protection Class | IP54 |
| Range | Up to 40 ft. |
| Laser Diode | 500-540 nm |
| Operating Temperature | 14°F to 104°F |
| Laser Class | 2 |
| Working Range | Up to 40 ft. |
Ensure the device and tool are securely mounted before operation.
Identifies potential personal injury hazards; obey all safety messages.
Alerts the user to consult the manual for important information.
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Do not stare into the laser beam; it produces class 2 laser radiation.
Maintain warning labels and use controls as specified in the manual.
Position securely, use only recommended accessories, and do not use for unintended purposes.
Keep the work area clean and well lit to prevent accidents.
Follow instructions for battery use, charging, and disposal to prevent hazards.
If laser strikes eye, close eyes and turn head away from the beam.
Keep magnets away from pacemakers and sensitive data media.
Use the correct tool for your application for better and safer results.
Maintain tools for proper operation and seek qualified service for repairs.
Develop a schedule for cleaning and checking the tool for proper function.
For determining and checking horizontal and vertical lines in enclosed working sites.
Overview of product components and their corresponding numbers as shown in illustrations.
Instructions for opening the battery lid, inserting batteries, and polarity.
Protect the tool from moisture and temperature extremes; switch off for transport.
Instructions for turning the tool on and off, and safety warnings related to the laser beam.
How to position the tool for automatic leveling and what to do if deviations occur.
Guidance on using flexible mounting devices and tripods for tool placement.
Explanation of how laser viewing glasses enhance visibility of the laser beam.
Keep the tool clean using a moist cloth; avoid solvents and immersing in fluids.
Recycle raw materials, batteries, accessories, and packaging according to regulations.
Details of the 1-year limited warranty, extension to 2 years upon registration.
Policy for returning the product within 30 days for a full refund or replacement.
To Next Page
