16
Maintenance and Service
Keep the tool clean at all times.
Do not immerse the tool into water or other
fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces of the laser beam
outlets in particular, and pay attention to any
fluff of fibers.
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article num-
ber given on the type plate of the tool.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries in-
stead of disposing of waste. The unit,
accessories, packaging & used batter-
ies should be sorted for environmen-
tally friendly recycling in accordance with the
latest regulations.
160992A8JG GLL50-20 G 202306.indd 16 6/9/23 9:46 AM
To Next Page
Loading...
