18 | English
1 609 92A 4BL | (01.10.2018) Bosch Power Tools
Application tool Material Application
non-hardened nails and
screws
Delicate adaptation work in wood;
example: Sawing recesses for locks and fittings
HCS plunge cut
saw blade for wood
Wood-based materials,
soft plastics
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Thin plunge cut in solid wood for installing a
ventilation grille
Bi-metal plunge cut
saw blade for hard-
wood
Hardwood, laminated
boards
Plunge cuts in laminated boards or hardwood;
example: Installation of skylights
TC plunge cut saw
blade, metal
Metal, extremely abrasive
materials, fibreglass, plas-
terboard, cement-bonded
fibreboard
Plunge cuts in extremely abrasive materials or metal;
example: Cutting kitchen front covers, easy cutting
through hardened screws, nails and stainless steel
Bi-metal plunge cut
saw blade for wood
and metal
Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and
screws
Plunge cuts in laminated boards or hardwood;
example: Shortening door frames, recesses for a shelf
TC-Riff segment
saw blade
Cement joints, soft wall
tiles, fibreglass-reinforced
plastics, porous concrete
Making cuts near edges, in corners or in difficult-to-reach
areas;
example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics
Diamond-Riff seg-
ment saw blade
Cement joints, soft wall
tiles, epoxy resin, fibre-
glass-reinforced plastics
Precise routing and cutting of tile/joint material, epoxy
resin and fibreglass-reinforced plastics;
example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic
TC-Riff Delta plate Mortar, concrete residue,
wood, abrasive materials
Rasping and sanding on a hard surface;
example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue
TC-Riff grout and
mortar remover
Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, abrasive
materials
Routing and cutting of joint material and tile material, as
well as rasping and sanding on a hard surface;
example: Removing tile adhesive and joint mortar
HCS multi blade Roofing felt, carpets, arti-
ficial turf, cardboard, PVC
flooring
Fast and precise cutting of soft material and flexible abras-
ive materials;
example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.
Scraper, fixed Carpets, mortar, con-
crete, tile adhesive
Scraping on a hard surface;
example: Removing mortar, tile adhesive, concrete
residue and carpet adhesive residue
Scraper, flexible Carpet adhesive, paint
residue, silicone
Flexible scraping on a soft surface;
example: Removing silicone joints, carpet adhesive
residue and paint residue
Bi-metal segment
serrated blade
Insulation material, insula-
tion boards, floor panels,
impact sound insulation
boards, cardboard, car-
pets, rubber, leather
Precise cutting of soft materials;
example: Cutting insulation boards to size, cutting pro-
truding insulation material to length so that it is flush with
the surface
To Next Page
Loading...
