Bosch PR10E - Plunge-Base Palm Router Configuration

-8-
Functional Description and Specifications
Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
!
WARNING
Plunge-Base Palm Router Configuration
FIG. 2
Model Number PR10EP PR20EVSP
Bit Capacity 1/4" shank 1/4" shank
Max. Cutter Diameter **
* Cutter diameter must be at least 1/4” smaller than opening for the
bit and cutter.
NOTE: For tool specifications refer to the nameplate on your tool.
2
1
0
IN
50
40
30
20
10
0
MM
AIR VENTS
POWER CORD
BRUSH CAP
Variable-Speed Dial
(model PR20EVSP only)
ROCKER ON/OFF SWITCH
DEPTH
INDICATOR
DEPTH
INDICATOR
KNOB
DEPTH ROD
FINE
ADJUSTMENT
KNOB
DEPTH STOP
TURRET
COLLET NUT
SUBBASE
BIT ROTATION
ARROW
BM 2610021461 06-12_BM 2610021461 06-12.qxp 6/26/12 1:38 PM Page 8