Need help?Do you have a question about the Bosch Professional Pro Pruner and is the answer not in the manual?
General| Battery Voltage | 12 V |
|---|---|
| Cutting Diameter | 25 mm |
| Battery Type | Li-Ion |
| Weight (without battery) | 0.8 kg |
| Vibration Level | 2.5 m/s² |
Read all safety warnings and instructions provided with the power tool.
Keep work area clean and lit; avoid explosive atmospheres; keep bystanders away.
Match plugs to outlets; avoid contact with earthed surfaces; keep tools dry; do not abuse cords.
Stay alert; use PPE; prevent unintentional starting; do not overreach; dress properly.
Do not force tools; use correct tool; maintain tools; disconnect power before adjustments.
Use specified chargers and batteries; protect from damage, heat, and short circuits.
Avoid liquid contact, physical damage, and extreme temperatures; store properly.
Have power tool serviced by qualified personnel using identical replacement parts.
Service of damaged battery packs should only be done by manufacturer or authorized providers.
Not for unsupervised children/persons with reduced capabilities; keep bystanders away; handle blades with care.
Keep hands away from blades; check blades before use; wear gloves; avoid cutting wires.
The tool is intended for professional use in pruning branches and plants with a diameter up to 25 mm.
Lists and describes the numbered parts of the power tool shown in the graphics page.
Provides key technical specifications like article number, voltage, cutting performance, and weight.
Instructions on how to safely remove the battery pack from the power tool.
Explanation of the LED indicator for battery charge levels.
Steps to insert the battery and switch the tool on to sleep mode.
Procedure to activate the cutting knife to the ready-to-cut position.
How to perform the cutting action by pressing the cutting switch.
Method to move the cutting knife to the closed and locked position.
Instructions on how to turn off the power tool.
Addresses issues where the warning LED flashes red, indicating a jammed tool.
Explains the solid red warning LED, indicating high temperature of components.
Troubleshoots why the cutting knife may not move after pressing the switch.
Provides solutions for when the cutting blade is jammed in a branch.
Addresses issues with cuts not being smooth, likely due to blunt or worn blades.
Guidelines for keeping the tool clean and maintained.
Instructions on how to adjust the distance between the cutting knife and blade.
Procedure for lubricating the cutting knife for optimal performance.
Information on how to contact customer service for maintenance, repair, and spare parts.
Information on obtaining help with questions about products and accessories.
Notes on transporting lithium-ion batteries, including shipping by third parties.
Instructions for environmentally-friendly recycling of tools, batteries, and packaging.
To Next Page
