Bosch Professional GDS 18V-1050 H - Page 18

18 | English
Impact WrenchGDS
18V-1000
GDS
18V-1050H
GDS
18V-1000C
GDS
18V-1000PC
GDS
18V-1050HC
–Setting 1Nm0–3500–3500–3500–3500–350
–Setting 2Nm0–7000–7500–7000–7000–750
–Setting 3Nm0–10000–10500–10000–10000–1050
Max. tightening torque
B)
Nm10001050100010001050
Max. breakaway torque
B)
Nm16001700160016001700
Machine screw diametermmM10–M24M10–M24M10–M24M10–M24M10–M24
Tool holder ½" ¾" ½" ½" ¾"
Weight according to
EPTA-Procedure 01:2014
B)
kg3.2–4.23.2–4.23.2–4.23.2–4.23.2–4.2
Recommended ambient temper-
ature during charging
°C0 to +350 to +350 to +350 to +350 to +35
Permitted ambient temperature
during operation
C)
and during
storage
°C–20 to +50–20 to +50–20 to +50–20 to +50–20 to +50
Recommended rechargeable
batteries
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargersGAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
Data transfer
Bluetooth®
D)
––Bluetooth® 4.1
(Low Energy)
Bluetooth® 4.1
(Low Energy)
Bluetooth® 4.1
(Low Energy)
Signal intervals––888
Max. signal range
E)
m––303030
A)
Measured at 20−25°C with rechargeable batteryProCORE18V 8.0Ah.
B)Depends on battery in use
C)Limited performance at temperatures <0°C
D)The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
E)The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-2.
Typically the A-weighted noise level of the power tool are:
95 dB(A); sound power level 106 dB(A).
Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-2:
Impact tightening of fasteners of the maximum capacity of
the tool: a
h
=13.5 m/s
2
, K=1.5 m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
1 609 92A 5N5 | (06.08.2020)Bosch Power Tools