Bosch Professional GGS 18V-10 SLC - Page 17

English | 17
(5)
On/off switch
(6)
Battery release button
A)
(7)
Battery
A)
(8)
Handle (insulated gripping surface)
(9)
Cover for GCY30-4 Bluetooth® Low Energy Module
A)
(10)
Open-ended spanner on the grinding spindle
A)
(11)
Open-ended spanner on the clamping nut
A)
(12)
Inner shank dimension L
0
(13)
User interface
(14)
Battery charge indicator (user interface)
(15)
Speed setting indicator (user interface)
(16)
Speed preselection button (user interface)
(17)
Power tool status indicator (user interface)
(18)
Overload protection indicator (user interface)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Straight grinder GGS 18V-10 SLC
Article number
3 601 BB4 0..
Rated voltage V= 18
Rated speed
A)
min
–1
10,500
Max. collet diameter mm 8
Spanner flat on the
– Clamping nut mm 19
– Grinding spindle mm 19
Spindle collar diameter mm 43
Max. grinding tool diameter mm 50
Max. polishing tool diameter mm 80
Kickback stop ●
Restart protection ●
Weight according to EPTA-
Procedure 01:2014
A)
kg 2.2–3.0
Recommended ambient tem-
perature during charging
°C 0 to +35
Permitted ambient temperat-
ure during operation
B)
and
during storage
°C –20 to +50
Recommended batteries GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18V...
GAL 36...
Data transmission
Bluetooth
®
Bluetooth® 4.1
(Low Energy)
C)
Signal interval s 8
Straight grinder GGS 18V-10 SLC
Max. signal range
D)
m 30
A) Depends on battery in use
B) Limited performance at temperatures <0°C
C) The mobile terminal devices must be compatible with
Bluetooth® Low Energy devices (version 4.1) and support the
Generic Access Profile (GAP).
D) The signal range may vary greatly depending on external condi-
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-23.
Typically, the A-weighted sound pressure level of the power
tool is 79dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN60745-2-23:
Surface grinding (roughing with grinding tool diameter of
25mm):
a
h
=8.5m/s
2
K=1.5m/s
2
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Inserting the

®
Low Energy
ModuleGCY30-4
Note: The Bluetooth
®
Low Energy ModuleGCY30-4 is avail-
able as an accessory.
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy ModuleGCY30-4.
Bosch Power Tools 1 609 92A 5E8 | (04.02.2020)