Need help?Do you have a question about the Bosch GGS 27 L and is the answer not in the manual?
General| Power | 650 W |
|---|---|
| No-load speed | 11, 000 rpm |
| Weight | 1.8 kg |
| Collet diameter | 6 mm |
| Length | 360 mm |
| Power Input | 650 W |
| Spindle Lock | Yes |
Details product model GGS 27 L, part number, power, frequency, voltage, speed, and dimensions.
The machine is designed for grinding and deburring metal using corundum grinding tools.
Measured values according to EN 50 144, A-weighted sound pressure level typically 82 dB(A).
Read all safety information completely before use. Ask for a practical demonstration.
Instructions for mounting grinding tools, including safety precautions and steps for secure attachment.
Check mains voltage, switch on/off procedure, and perform a test run.
Guidance on optimal grinding results, pressure, and tool usage for effective operation.
Keep machine clean, blow out ventilation slots, and follow repair procedures.
Keep work area clean, guard against electric shock, dress properly, and wear safety glasses.
Do not force tool, use right tool, secure work, avoid unintentional starting, and check damaged parts.
Do not abuse supply cable, keep away from heat/oil, use outdoor extension cords.
Details warranty validity, exclusions like improper use, and service center information.
Instructions for recycling machine, accessories, and packaging for environmental-friendly disposal.
To Next Page