Bosch GWS13-50 User Manual

IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
For English Version Version française Versión en español
See page 2 Voir page 26 Ver la página 50
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
G
WS10-45
GWS10-45P
GWS10-45PD
GWS13-50
GWS13-50P
GWS13-50PD
GWS13-50VS
GWS13-50VSP
GWS13-60
GWS13-60PD
2610041357 09-15 GWS10 GWS13.qxp_GWS series 9/18/15 12:56 PM Page 1

Bosch GWS13-50 Specifications

General

Power	13 amps
Voltage	120 V
Rated Input Power	1300 W
Corded/Cordless	Corded
Wheel Diameter	5 inches
Spindle Thread	5/8 - 11
No Load Speed	11, 500 RPM

Summary

General Power Tool Safety Warnings

Work area safety

Guidance on maintaining a safe and clean work area free from hazards.

Electrical safety

Instructions for safe electrical connections and preventing shock hazards.

Personal safety

Advice on staying alert, using PPE, and avoiding distractions during operation.

Safety Warnings Common for Grinding, Sanding, Wire Brushing, and Abrasive Cutting-Off Operations

Power tool use and care

Guidelines for proper operation, maintenance, and handling of power tools.

Kickback and Related Warnings

Explains kickback and provides precautions to avoid it.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Angle Grinders with Paddle Switch

Angle Grinders with Slide Switch

Functional Descriptions

Electronic Clutch

Detects binding situations and prevents further rotation by switching off the tool.

Constant Response Circuitry

Soft Start

Automatic Restart Protection

Overload Protection

Variable Speed

Assembly Instructions

Installing Wheel Guards (Type 27 and Type 41/1A Wheel Guards)

Abrasive Type 27 Grinding Wheel & Sanding Flap Disk Assembly

Abrasive Type 41/1A and 27 Cutting Wheel Assembly

Concrete Dust Extraction Attachment for Surfacing Grinding Assembly

Sanding Assembly

Wire Cup Brush Assembly

Masonry Cutting Guard Assembly

Operating Instructions

Paddle Switch (Fig. 17)

Slide Switch (Fig. 18)

Metal Grinding

Metal Cutting

Masonry / Concrete Cutting

Concrete Surfacing

Sanding

Wire Brush (Wheels and Cups)

Maintenance

Preventive maintenance