Bosch GWS18V-8 User Manual

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
IMPORTANT
Read Before Using

IMPORTANT
Lire avant usage

IMPORTANTE
Leer antes de usar
For English Version
See page 2

Version française
Voir page 25

Versión en español
Ver la página 48
Call Toll Free for Consumer Information and Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
GWS18V-8
2610067310_04-21_GWS18V-8.qxp_GWS 4/1/21 10:06 AM Page 1

Bosch GWS18V-8 Specifications

General

Voltage	18 V
Disc Diameter	125 mm
No-Load Speed	11, 000 rpm
Weight	2.3 kg
Motor Type	Brushless
Spindle Thread	M14
Battery Type	Lithium-ion

Summary

Safety Symbols and Warnings

Safety Alert Symbol Meanings

Explains DANGER, WARNING, CAUTION levels for hazards.

General Power Tool Safety Warnings

Power Tool-Specific Safety Warnings

General safety for grinding, sanding, wire brushing, and cutting.

Power Tool-Specific Safety Warnings

Kickback Warnings

Explains kickback and how to avoid it.

Additional Cutting and Sanding Safety

Further safety tips for cutting and sanding operations.

Grinding and Cutting Safety

Specific safety advice for grinding and cutting operations.

Wire Brushing Safety

Specific safety guidelines for wire brushing tasks.

Assembly Instructions

Battery Pack Installation

Wheel Guard Installation

Procedures for attaching, adjusting, and removing the wheel guard.

Lock Nut and Backing Flange

Concrete Dust Extraction Attachment

Masonry Cutting Guard Setup

Side Handle and Hand Guard

Operating Instructions

Side On-Off Switch Operation

How to use the side switch, including locking it ON for continuous use.

Grinding Operations

Selecting and Using Grinding Wheels

Cutting Operations

Metal Cutting Procedures

Safe practices for cutting metal with the tool.

Masonry and Concrete Cutting

Techniques for cutting masonry and concrete materials.

Concrete Surfacing

Sanding Operations

Selecting and Sanding Discs

Maintenance and Care

Accessories and Warranty Information

Details on accessories and the limited warranty policy.