To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS18V-10N and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Disc Diameter | 4-1/2 in |
| No-Load RPM | 10, 000 RPM |
| No Load Speed | 10, 000 RPM |
| Spindle Thread | 5/8 in-11 UNC |
Ensures a safe working environment by maintaining cleanliness, avoiding hazardous atmospheres, and keeping bystanders away.
Guidelines for safe electrical connections, grounding, and handling to prevent shock hazards.
Emphasizes staying alert, using PPE, and maintaining balance for personal protection during operation.
Proper techniques for using and maintaining power tools to ensure safety and longevity.
Guidelines for safe charging, handling, and usage of battery packs to prevent fire and injury.
Instructions for obtaining professional repair and maintenance for the power tool.
General safety precautions applicable to multiple operations like grinding, sanding, and cutting.
Explains kickback and provides precautions to avoid it during tool operation.
Specific safety advice for grinding and abrasive cutting operations, including guard usage and wheel selection.
Specific safety advice for abrasive cutting operations, focusing on wheel jamming, body positioning, and restart procedures.
Safety precautions for sanding operations, emphasizing disc selection and proper technique to avoid hazards.
Safety advice for wire brushing, covering bristle hazards and brush expansion during use.
Covers electrical compatibility, handling, workpiece securing, maintenance, and dust collection practices.
Explanation of symbols related to electrical units (V, A, Hz, W) and measurements (speed, diameter).
Explanation of symbols indicating safety alerts (PPE) and product certifications (UL, CSA, ETL).
Identifies the main parts and features of the GWS18V-10 cordless angle grinder.
Details the technical specifications and compatible applications for the GWS18V-10 grinder.
Explains features like Kickback Control, Constant Response Circuitry, Automatic Restart, Overload, and Drop Control.
Describes the automatic electric brake that rapidly stops the accessory after trigger release.
Step-by-step guide on how to attach and adjust the wheel guard for safety during operation.
Instructions for attaching the vibration control side handle, hand shield, and quick-clamping nut.
Procedure for attaching grinding wheels using backing flanges and lock nuts.
Instructions for assembling Type 41/1A and 27A cutting and grinding wheels.
Steps for installing backing pads, sanding discs, wire cup brushes, and wire wheels.
Guide for installing the dust extraction attachment for surfacing grinding operations.
Instructions for installing the masonry cutting guard and rotating the gearbox for ergonomics.
Procedure for attaching a dry diamond wheel using the backing flange and lock nut.
Instructions on how to insert and remove the battery pack from the tool safely.
Explains how to operate the side on-off switch, including the lock-on feature for continuous grinding.
Guidance on selecting and using grinding wheels, including tips for efficient grinding.
Instructions for performing metal cutting with the grinder, including guard requirements and precautions.
Procedures for cutting masonry and concrete, emphasizing dust extraction and kickback prevention.
Guidelines for performing concrete surfacing using diamond cup wheels and dust extraction.
Detailed instructions for selecting sanding discs and performing sanding operations effectively.
Guidance on using wire brushes for cleaning, including pressure and handling tips.
Covers professional servicing, battery monitoring for end-of-life, and tool lubrication.
Information on DC motor maintenance and cleaning precautions to avoid damaging plastic parts.
Details standard and optional accessories, compatibility warnings, and storage recommendations.
