To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS18V-13C and is the answer not in the manual?
Explains the meaning of various safety symbols used in the manual.
Crucial safety guidelines applicable to all power tool operations.
Ensuring a clean, well-lit, and hazard-free environment for tool operation.
Guidelines for safe use of electricity to prevent shock hazards.
Recommendations for operator awareness, alertness, and protective measures.
Proper methods for using, maintaining, and caring for power tools.
Safe practices for using and maintaining battery packs and tools.
Instructions for maintaining and repairing the power tool.
General safety precautions for various grinding and brushing operations.
Information and warnings related to kickback forces and prevention.
Specific safety advice for grinding and cutting operations.
Extra safety tips for abrasive cutting-off tasks.
Precautions to take when performing sanding operations.
Safety guidelines for wire brushing applications.
Guidance on handling hazardous dust and chemical exposures during operation.
Details the types of applications the tool is suitable for.
Electronics that detect and prevent kickback situations.
Maintains consistent RPMs under varying load conditions.
Reduces motor stress for smoother accessory startup.
Prevents accidental tool startup after power interruption.
Protects motor from damage due to excessive heat or load.
Shuts off tool if dropped or subjected to significant impact.
Instructions for attaching and adjusting the wheel guard.
Information on installing the optional Bluetooth connectivity module.
Guidance on threading and using the side handle for control.
Instructions for using the hand shield accessory.
Details on using the quick-clamping nut for accessory mounting.
Information on using lock nuts and backing flanges for accessory mounting.
Steps for assembling disc grinding wheels onto the spindle.
Instructions for mounting Type 41/1A and 27A/42 abrasive wheels.
Warning against using Type 1 abrasive wheels for straight grinding.
Procedure for attaching backing pads and sanding discs.
Steps for installing wire cup brushes.
Procedure for attaching wire wheels.
Instructions for installing dust extraction for surfacing.
Guide for rotating the gearbox for masonry cutting operations.
Procedure for installing the masonry type 1 cutting guard.
Steps for installing a dry diamond wheel onto the spindle.
Instructions for inserting and removing the battery pack.
How to operate the side switch and its Lock-ON feature.
Instructions for using the paddle switch and its Lock-OFF feature.
Guidelines for selecting and performing grinding operations.
Precautions and procedures for metal cutting operations.
Steps and safety for cutting concrete and masonry materials.
Using the tool for concrete surfacing with dust extraction.
Instructions for selecting and performing sanding operations.
Safe operation and pressure guidelines for wire brushes.
Guide to using the Bosch Toolbox app for tool management.
Information on professional servicing and parts replacement.
Advice on battery replacement and care.
Information on the tool's lubrication status.
Recommendations for motor maintenance and replacement.
Guidelines for cleaning the tool and its components.
Advice on storing and maintaining accessories.
General
