-12-
page heading
Model Number GWS18V-13C GWS18V-13P
Battery
18V (Bosch or
AMPShareSeries)
18V (Bosch or
AMPShareSeries)
Rated speed n 8,500/min n 8,500/min
Switch Type Side Paddle
Run-Down Brake Included Included
Connectivity Module Sold separately N/A
Spindle thread 5/8”-11 UNC 5/8”-11 UNC
Max. spindle length 9/16” (14,3 mm) 9/16” (14,3 mm)
Max.Type 27 grinding wheel ⌀ 6” (150 mm) 6” (150 mm)
Type 27 grinding wheel thickness 0.25” (6mm) 0.25” (6mm)
Max.Type 41/1A, 27A cutting wheel ⌀ 6” (150 mm) 6” (150 mm)
Max. flap disc ⌀ 6” (150 mm) 6” (150 mm)
Max. sanding disc ⌀ 6” (150 mm) 6” (150 mm)
Max. wire wheel ⌀ 6” (150 mm) 6” (150 mm)
Max. wire cup brush ⌀ 3” (76 mm) 3” (76 mm)
Specifications
Model Number GWS18V-13C GWS18V-13P
Metal Grinding (Type 27) X X
Metal Grinding (Type 11) N N
Metal Cutting (Type 41/1A) O O
Concrete Surfacing O O
Concrete/Masonry Cutting O O
Sanding O O
Wire Brushing (Wheel) X X
Wire Brushing (Cup) O O
X = Tool is provided with attachments to perform this application.
O = Tool can use optional attachments to perform this application.
N = Tool is not capable of this application.
Accessory speed rating must be equal to or greater than the tool’s speed rating. Do not exceed the
recommended wheel diameter.
Do not use Type 11 abrasive (cup) wheels with this tool. This tool is not designed for use with type
11 (cup) abrasive grinding wheels.
Battery Packs / Chargers:
Please refer to the battery/charger list, included with your tool.
NOTE: For tool specifications refer to the nameplate on your tool.
Applications
160992A7PL GWS18V-13CP 202206.indd 12 6/22/22 2:39 PM
To Next Page
Loading...
