Bosch GWS 7-115 User Manual

EURO • Printed in Germany • BA 1 609 929 C85 • GWS 7-14-1000 • Titel (Vorderseite) • OSW 12/01
Bedienungsanleitung
Operating Instructions
Instructions d’emploi
Instrucciones de servicio
Manual de instruções
Istruzioni d’uso
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Brukerveiledningen
Käyttöohje
Oδηγία χειρισµού
Kullanım kılavuzu
Deutsch
English
Français
Español
Português
Italiano
Nederlands
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
GWS 7-115
GWS 7-125
GWS 9-125
GWS 10-125 C
GWS 1000
GWS 10-125 CE
GWS 14-125 C
GWS 14-125 CE
GWS 14-150 C
GWS 7-14-1000 - Buch Seite 1 Montag, 3. Dezember 2001 10:49 10

Bosch GWS 7-115 Specifications

General

Idle speed (max)	11000 RPM
Grinding disc diameter	115 mm
Input power	720 W
Output power	300 W
Power source	AC
Soft grip	Yes

Weight and Dimensions

Weight	1900 g

Summary

Tool Specifications

Angle Grinder Specifications

Detailed technical specifications for various angle grinder models including power, speed, and dimensions.

Noise and Vibration Information

Speed Preselection (Type CE)

For Your Safety

Machine Elements Identification

Identification of key components and parts of the angle grinder for user reference.

Intended Use of the Machine

Description of the intended applications and purpose for which the machine is designed.

Operating Instructions

General Safety Precautions

Essential safety guidelines for operating the power tool safely and correctly.

Rough Grinding Technique

Guidance on achieving optimal rough grinding results with proper technique and pressure.

Mounting Protective Devices

Protective Guard Installation

Instructions for mounting the protective guard, ensuring correct orientation for operator safety.

Auxiliary Handle and Hand Protector

Mounting the auxiliary handle and recommended hand protector for secure grip and control.

Mounting Grinding Tools

Roughing and Cutting Disc Mounting

Guidance on fitting roughing/cutting discs, ensuring correct dimensions and fit.

Accessory Mounting Procedures

Flap Disc, Sanding Plates, Brushes

Instructions for fitting flap discs, sanding plates, and cup/disc brushes using appropriate hardware.

Approved Grinding Tools Specifications

SDS-clic Quick Clamping Nut

Initial Operation Guide

Mains Voltage and Starting

Ensuring correct mains voltage and how to start, lock, and switch off the tool.

Starting Current Limiting (Type C/CE)

Constant Electronics (Type C/CE)

Overload Protection Mechanism

Speed Preselection (Type CE) Operation

Working with Flap Discs

Cutting Operation Guidelines

Cutting Grinder Stand Use

Cutting Stone Procedures

Rotating the Machine Head

Maintenance and Cleaning

Plug Connection Warning

Environmental Protection and Recycling

Service and Customer Assistance

EC Declaration of Conformity