To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS Professional 700 and is the answer not in the manual?
General| Power | 700 W |
|---|---|
| No-load speed | 11, 000 rpm |
| Disc diameter | 115 mm |
| Weight | 1.9 kg |
| Spindle Thread | M14 |
| Sound pressure level | 91 dB(A) |
| Sound power level | 102 dB(A) |
| Cable Length | 2.5 m |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, and/or serious injury.
Stay alert, watch what you are doing and use common sense when operating a power tool.
This power tool is intended to function as a grinder, sander, wire brush or cut-off tool.
Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
Use only wheel types that are recommended for your power tool and the specific guard.
Do not use excessively oversized sanding disc paper.
Be aware that wire bristles are thrown by the brush even during ordinary operation.
The power tool is intended for cutting, roughing and brushing metal and stone materials without the use of water.
Pay attention to the mains voltage. The voltage of the power source must match the voltage specified.
