To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 10-125 C and is the answer not in the manual?
General| Power Input | 1000 W |
|---|---|
| No-load Speed | 11, 000 rpm |
| Disc Diameter | 125 mm |
| Weight | 2.1 kg |
| Tool Dimensions (Length) | 298 mm |
| Tool Dimensions (Height) | 102 mm |
| Spindle Thread | M14 |
Presents technical specifications for various angle grinder models in a tabular format.
Details measured noise levels and typical vibration acceleration values for the tool.
Explains speed selection using the thumbwheel for different materials and applications.
Lists and identifies numbered components of the angle grinder for user reference.
Defines the purpose and applications for which the angle grinder is designed.
Provides critical safety advice for operating the machine safely.
Covers essential safety advice for general operation and handling the tool.
Highlights warnings and precautions for specific tasks like cutting and grinding.
Provides guidance on achieving optimal results and techniques for rough grinding.
Details the installation of protective guards, auxiliary handles, and hand protectors.
Explains the procedure for mounting roughing and cutting discs onto the spindle.
Instructions for mounting and using flap discs and rubber sanding plates.
Guidance on mounting and using cup brushes and disc brushes.
Lists specifications for approved grinding tools, including speed and dimensions.
Details the use and mounting of the SDS-clic quick clamping nut accessory.
Instructions on connecting to power and starting/stopping the machine.
Explains the function of starting current limiting and fuse requirements.
Describes constant electronics for stable performance and overload motor stop.
Reiterates preselecting speed using the thumbwheel as per specifications.
Details applications for flap discs, including curved surfaces and profiles.
Provides instructions on proper techniques for cutting, avoiding tilt or oscillation.
Instructions for using the cutting grinder stand for angled cuts.
Guidelines for dry cutting stone, including using diamond discs and dust extraction.
Instructions on how to rotate the machine head for ergonomic positioning.
Covers essential maintenance, cleaning, and ventilation slot care for the machine.
Provides crucial safety instructions for connecting a new 3-pin plug to the cable.
Details procedures for recycling raw materials, packaging, and plastic components.
Lists contact information for service and customer support in various regions.
States the product's conformity with relevant directives and standards.
