To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 10-125 CE and is the answer not in the manual?
General| Rated input power | 1000 W |
|---|---|
| Disc diameter | 125 mm |
| Weight | 2.1 kg |
| Tool dimensions (width) | 73 mm |
| Tool dimensions (height) | 102 mm |
| Switch | 2-way |
| Power output | 630 W |
| Spindle thread | M 14 |
| No-load speed | 11000 rpm |
Detailed specifications for various angle grinder models, including order numbers, power, speed, and dimensions.
Provides A-weighted noise levels and typical hand/arm vibration values for safe operation.
Identifies and lists the various components and accessories of the angle grinder.
Specifies intended applications and crucial safety instructions for operating the tool.
Comprehensive safety advice covering tool operation, electrical safety, workpiece handling, and protective measures.
Details regulations for slots in load-carrying walls and the need for structural engineer consultation.
Instructions for fitting the protective guard and auxiliary handle for safe tool operation.
Guides on attaching various grinding discs and tools, including specific considerations for diamond discs.
Describes mounting procedures for flap discs, rubber sanding plates, cup brushes, and approved grinding tools.
Explains the use and mounting of the SDS-clic quick clamping nut accessory for tool changes.
Guides on checking mains voltage and starting/stopping the machine using the On/Off switch.
Explains soft start, constant electronics, overload protection, and speed preselection features.
Provides instructions for cutting, rough grinding, and using cutting discs correctly.
Details the use of the cutting grinder stand accessory for angled cuts.
Instructions for dry cutting stone using diamond discs and dust extraction.
Describes how to rotate the machine head for optimal handling and specific working situations.
Guidelines for keeping the machine clean, ventilation slots clear, and handling extreme conditions.
Important safety instructions for connecting a new 3-pin plug to the 2-wire cable.
Guidelines for recycling raw materials and sorting packaging for environmental-friendly recycling.
Contact information for service and assistance in various countries.
Statement declaring product conformity with relevant directives and standards.
