To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 14-125 CE and is the answer not in the manual?
General| Power Input | 1400 W |
|---|---|
| Disc Diameter | 125 mm |
| Weight | 2.2 kg |
| Power Output | 820 W |
| Spindle Thread | M14 |
| Sound Power Level | 104 dB(A) |
| Sound Pressure Level | 93 dB(A) |
Detailed technical specifications for various angle grinder models.
Noise and vibration levels measured according to EN 50 144.
Guide for setting speed using the thumbwheel for CE models.
Identification and description of various machine components.
Essential safety precautions for operating the tool.
Specific instructions for safe operation and handling.
Regulations for slots in load-carrying walls (DIN 1053).
How to mount and position the protective guard.
Instructions for mounting the auxiliary handle.
Details on the optional vibration-dampening auxiliary handle.
Guidance on mounting the hand protector accessory.
Procedures for mounting roughing and cutting discs.
Instructions for flap discs, sanding plates, and cup brushes.
Table of approved grinding tools and their specifications.
How to mount and use the SDS-clic quick clamping nut.
Verifying the power source voltage matches the machine.
Instructions for turning the machine on, off, and locking the switch.
Information on soft start feature and fuse requirements.
Explanation of constant electronic control for consistent performance.
How the overload protection mechanism works.
Benefits and application of flap discs for contour sanding.
Technique for safe and effective cutting, avoiding side pressure.
Recommended approach angle and technique for rough grinding.
Using the accessory cutting grinder stand for precise cuts.
Guidelines for dry cutting stone with diamond discs.
Instructions for rotating the machine head for optimal handling.
Instructions for keeping the machine clean and in good working order.
Contact information for service and assistance in various regions.
Guidelines for recycling machine parts and packaging.
