To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 14-125 C and is the answer not in the manual?
General| Power input | 1400 W |
|---|---|
| No-load speed | 11, 000 rpm |
| Disc diameter | 125 mm |
| Weight | 2.2 kg |
| Power Source | Corded |
| Wheel Diameter | 125 mm |
| Spindle Thread | M14 |
| Length | 298 mm |
| Cable length | 2.5 m |
| Amperage | 12 A |
Measured values determined according to EN 50 144, A-weighted noise levels and typical weighted acceleration.
Describes the machine's purpose for cutting, roughing, brushing metal/stone, and sanding/polishing.
Safety precautions like wearing protective gear, handling dust, and electrical safety.
Instructions on switching off, unplugging, and handling the machine during operation.
Guidance on clamping workpieces, avoiding stalling, and handling hot discs.
Notes on permissible speed, checking tools, and protecting them from impact.
Instructions on mounting and positioning the protective guard for safety.
Requirement to mount the auxiliary handle for all work and positioning options.
Detailed instructions for dry cutting/grinding stone with diamond discs and dust extraction.
