To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS Professional 14-125 CIE and is the answer not in the manual?
General| Power Input | 1400 W |
|---|---|
| No-load Speed | 2800 - 11500 rpm |
| Disc Diameter | 125 mm |
| Power Output | 820 W |
| Spindle Thread | M14 |
| Sound Power Level | 103 dB(A) |
| Sound Pressure Level | 92 dB(A) |
Ensures safe operation by maintaining a clean, well-lit workspace and keeping bystanders away.
Covers precautions for plugs, cords, and avoiding contact with earthed surfaces to prevent electric shock.
Emphasizes staying alert, using PPE, and preventing unintentional starting for operator safety.
General safety advice applicable to various operations like grinding, sanding, wire brushing, and cutting.
Table detailing specifications for various angle grinder models.
Table detailing specifications for various angle grinder models.
Instructions for fitting safety guards, extraction hoods, and handles.
Instructions for mounting the guard to protect during grinding operations.
Instructions for mounting the guard to protect during cutting operations.
Instructions for mounting the dust extraction hood for sanding.
Guidelines for attaching and positioning the auxiliary handle for better control.
Details on the vibration-dampening handle for improved comfort and safety.
Instructions for mounting the hand guard when using specific accessories.
Steps for securely mounting grinding and cutting discs, including checks.
Instructions for mounting and using flap discs, requiring a hand guard.
Steps for mounting rubber sanding plates, requiring a hand guard.
Instructions for mounting cup brushes and disc brushes, requiring a hand guard.
Guide to using the SDS-clic nut for quick accessory changes.
Steps and precautions for safely starting the power tool, including voltage checks.
Instructions on how to operate the on/off switch, including locking the switch.
Description of the kickback stop feature and how to restart after activation.
Explanation of the restarting protection feature and how to restart the tool.
Details on the electronic reduced starting current feature for smoother power-up.
Explanation of the constant electronic control for maintaining speed under load.
Specific instructions and safety advice for cutting metal with the tool.
Guidance on performing rough grinding effectively and safely.
Information on using flap discs for working with curved surfaces and profiles.
Specific instructions and safety advice for cutting stone, emphasizing dust extraction.
Procedures for keeping the tool clean and well-maintained for safe operation.
Information on obtaining repair services, spare parts, and customer support.
