To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 6-115 PROFESSIONAL and is the answer not in the manual?
General| Input power | 670 W |
|---|---|
| Power source | AC |
| Spindle thread | M14 |
| Idle speed (max) | 11000 RPM |
| Sound power level | 86 dB |
| Sound pressure level | 97 dB |
| Grinding disc diameter | 115 mm |
| Vibration level (sanding) | 4 m/s² |
| Vibration level (grinding) | 7 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
| Product color | Black, Blue |
| Protective guard | Yes |
| Number of grinding discs | - |
Weight and Dimensions| Weight | 1900 g |
|---|
Ensure a clean, well-lit area; keep bystanders away.
Proper grounding, avoid earthed surfaces, protect cord.
Stay alert, use PPE, prevent unintended starting, maintain balance.
Do not force tool, maintain it, keep accessories sharp.
Ensure tool serviced by qualified personnel with identical parts.
Follow instructions, use correct accessories, wear PPE, avoid flammable materials.
Understand kickback causes and prevention methods to avoid injury.
Use correct guards/wheels, avoid side forces, secure workpiece.
Use correct disc size, avoid excessive load on wire brushes.
Be aware of thrown bristles, use guard if recommended.
Use detectors for utilities, secure workpiece, keep workspace clean.
Machine for cutting, roughing, brushing metal and stone without water.
Lists key features like spindle lock, on/off switch, auxiliary handle.
Statement of compliance with EU directives and standards.
Instructions for attaching grinding and cutting guards, and hand guard.
Guidance on attaching and using the auxiliary handle for better control.
Procedures for securely attaching discs, brushes, and nuts.
Specifications for compatible grinding tools and their permissible speeds.
Ensure correct mains voltage and generator suitability before starting.
How to start, stop, and lock the power tool's switch.
Explains the function of reduced starting current in specific models.
Describes the constant electronic control for maintaining speed under load.
How to set the desired speed using the thumbwheel for different applications.
Techniques and recommended angle for effective rough grinding.
Benefits and applications of using flap discs for working surfaces.
Guidelines for safe and effective metal cutting with the tool.
Specific instructions for cutting stone, including dust extraction and cutting guide.
Procedures for keeping the tool clean and ensuring safe operation.
