Need help?Do you have a question about the Bosch Professional GWS 600 and is the answer not in the manual?
General| Power Input | 600 W |
|---|---|
| No-load Speed | 12, 000 rpm |
| Disc Diameter | 115 mm |
| Weight | 1.6 kg |
| Spindle Thread | M14 |
| Cable Length | 2.5 m |
Key safety warnings and instructions for power tool operation covering work area, electrical, and personal safety.
General safety warnings for angle grinder operations like grinding, sanding, wire brushing, and cutting.
Specific safety advice to prevent and manage kickback incidents during angle grinder use.
Safety guidelines for grinding and abrasive cutting-off, including wheel types, guards, and operational procedures.
General safety advice, including wearing eye protection and securing workpieces.
Defines the machine's purpose for cutting, roughing, and brushing metal and stone without water.
Lists and identifies the various parts and components of the power tool.
Provides detailed technical specifications, dimensions, and performance data for the GWS 600.
Instructions for assembling protective devices, auxiliary handles, and hand guards.
Steps for attaching grinding and cutting protection guards to the tool.
Details on how to mount and adjust the protection guard for grinding operations.
Guidance on using the specific protection guard for cutting with bonded abrasives.
Information on mounting and using the cutting guide with dust extraction.
Instructions for fitting and positioning the auxiliary handle for optimal grip.
Guidance on when and how to mount the hand guard for specific accessories.
Steps and precautions for mounting grinding tools, including spindle lock usage.
Procedure for attaching grinding and cutting discs, including checking for clearance.
Specific instructions for mounting flap discs, including flange and O-ring checks.
Guidance for mounting rubber sanding plates and associated nuts.
Instructions for screwing and tightening cup brushes and disc brushes.
Details on using the SDS-clic quick-clamping nut for tool changes.
Information on approved grinding tools and their maximum permissible speeds.
Steps to unscrew, rotate, and retighten the machine head for ergonomic adjustment.
Information on health hazards from dust exposure and recommended protective measures.
Measures to prevent dust accumulation and ensure safe working conditions.
Instructions for connecting to power, checking voltage, and initial start-up procedures.
How to operate the On/Off switch, including locking it in the 'on' position.
General tips for efficient and safe operation, including clamping workpieces and avoiding tool stalling.
Technique for rough grinding, including angle and pressure recommendations.
Guidelines for working with flap discs on curved surfaces and profiles.
Best practices for cutting metal, including using the correct guard and moderate feed.
Requirements for dust extraction when cutting stone and suitable vacuum cleaners.
Recommendations for wearing a dust respirator and performing dry cutting of stone.
Instructions for keeping the machine and ventilation slots clean for safe operation.
Information on where to get help for maintenance, repair, and spare parts.
Guidelines for environmentally friendly disposal of the machine, accessories, and packaging.
To Next Page