To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 11-125 CIH and is the answer not in the manual?
General| Power Input | 1100 W |
|---|---|
| No-load Speed | 11000 rpm |
| Disc Diameter | 125 mm |
| Spindle Thread | M 14 |
| Length | 297 mm |
Safety guidelines for maintaining a clean, well-lit work area and keeping bystanders away.
Precautions regarding power tool plugs, cords, and protection against electric shock.
Advice on operator alertness, protective equipment, and preventing unintentional starting.
Instructions for proper power tool usage, maintenance, and safe operation practices.
General safety advice applicable to multiple operations like grinding and sanding.
Specific safety guidelines for sanding operations, including disc paper selection.
Safety advice for wire brushing, covering bristle throw and guard compatibility.
Further safety advice, including checking for utility lines and using dust extraction.
Specific safety instructions for abrasive cutting, focusing on avoiding jamming and pressure.
Detailed explanation and precautions to prevent kickback incidents during operation.
Instructions for safe grinding and cutting, covering guard use and wheel selection.
Further safety advice for abrasive cutting, including wheel fitment and pressure.
General advice for operating the tool safely and effectively across various functions.
Lists and describes the main components and features of the angle grinder.
Provides specifications, performance data, and model-specific information.
Details measured noise and vibration levels according to EN standards.
Instructions for correctly attaching protective guards for sanding and cutting operations.
Guidance on mounting and using the extraction hood for sanding tasks.
Instructions for mounting and using the auxiliary handle for improved control.
General guidelines for safely mounting grinding and cutting discs.
Instructions for using and mounting the SDS-clic quick-clamping nut.
How to start the power tool, including voltage checks and initial setup.
Instructions for operating the On/Off switch and its lock-on function.
Explanation of the kickback stop feature and procedure for restarting.
Information on the electronic feature that limits power consumption during startup.
Details on the electronic control that maintains constant speed under load.
How to use the thumbwheel for preselecting speeds on specific models.
Safety and operational advice for cutting stone with the tool.
Guidelines for keeping the machine clean and well-maintained for safe operation.
Information on obtaining support, spare parts, and contacting Bosch service centers.
