To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GWS 14-125 and is the answer not in the manual?
General| Disc Diameter | 125 mm |
|---|---|
| Spindle Thread | M14 |
| Cable Length | 2.5 m |
| Power Input | 1400 W |
| No-load Speed | 11000 rpm |
| Power Source | Corded |
Wear PPE, prevent unintentional starts, maintain balance, and dress appropriately.
Use correct tools, ensure switch functionality, disconnect power, and maintain tools and accessories.
Follow safety for grinding, sanding, cutting; use compatible accessories and inspect them.
Install undamaged accessories, use PPE, maintain safe distances, and keep workspace clear.
Understand kickback, use firm grip, correct body position, and avoid specific hazardous operations.
Use correct wheels, guards, and applications; ensure flanges are undamaged for safe operation.
Avoid jamming, excessive pressure, improper body positioning, and restart in cuts.
Use correct wheels, guards, accessories, and be aware of bristle throw and disc cooling.
Hold tool firmly, check utilities, secure workpiece, and use appropriate PPE.
Store accessories properly, remove for transport, note disc expiration dates and plug type.
Tool is for cutting, brushing, roughing metal, plastic, stone; sanding with discs.
Lists and describes key components like switches, guards, handles, and accessories.
Details article numbers, rated power, power output for various models.
Details speed, dimensions, threads, controls, weight, protection class for specific models.
Details speed, dimensions, threads, controls, weight, protection class for specific models.
Details speed, dimensions, threads, controls, weight, protection class for specific models.
Provides sound pressure, sound power, and uncertainty levels for various models.
Details vibration levels for surface grinding and disc sanding operations.
Provides noise and vibration data for various models and disc diameters.
Explains how material, application, and maintenance affect vibration and noise levels.
Prevents uncontrolled starting after power interruption.
Limits torque on startup for a smooth, controlled start.
Maintains consistent speed under load for uniform performance.
Allows setting the required speed using a thumbwheel, even during operation.
Instructions for fitting the protective guard for grinding (11).
Instructions for using the extraction guard (10) for sanding.
Instructions for fitting guards for cutting, including cover attachments.
Instructions for fitting the extraction guard (34) with a guide block.
Instructions for fitting the hand guard (26) for specific accessories.
Instructions for attaching the auxiliary handle (8)/(9) for better grip.
Detailed steps for fitting discs using mounting flanges and clamping nuts.
Instructions for using the quick-clamping nut (22) for easy tool changes.
Lists permissible speeds for abrasive tools based on diameter and type.
Covers machine head rotation, dust filter removal, and dust extraction safety.
Safe operating practices include avoiding heavy loads, cooling accessories, and securing workpieces.
Advice for rough grinding, flap discs, and sanding discs, including guard usage.
Use guards for disc brushes; fit hand guard for cup/conical brushes and ensure correct spindle fitting.
Use protective guards for cutting, manage pressure, dust extraction, and wear masks for stone.
Guidelines for cutting plastic, composite, and other materials with specific discs and guards.
Best practices for dry diamond annular cutters, including guard use and plunge technique.
Adhere to structural regulations and follow start-up procedures, including power source checks.
Proper use of on/off switches, test runs, tool cleaning, and accessory care.
