To Next PageTo Next Page
Need help?Do you have a question about the Bosch PWS 10-125 CE and is the answer not in the manual?
General| Idle speed (max) | 11000 RPM |
|---|---|
| Grinding disc diameter | 125 mm |
| Input power | 580 W |
| Output power | 1020 W |
| Power source | AC |
| Product color | Black, Green, Red |
Weight and Dimensions| Weight | 2100 g |
|---|
Read all safety warnings and instructions to prevent electric shock, fire, and/or serious injury.
Maintain a clean, well-lit workspace and avoid hazardous environments.
Ensure proper grounding, avoid contact with earthed surfaces, and protect from water.
Stay alert, use protective equipment, and avoid distractions.
Use the correct tool, maintain it properly, and store it safely.
Have the power tool serviced by qualified personnel using identical replacement parts.
Follow all warnings for grinding, sanding, wire brushing, and cutting operations.
Use recommended accessories and guards for grinding and cutting.
Avoid jamming cut-off wheels, control kickback, and stop the tool when binding.
Understand and prevent kickback, a sudden reaction to a pinched rotating accessory.
Use appropriate disc paper and be aware of hazards.
Be aware of flying bristles and do not overstress the brush.
Wear safety goggles and use detectors for hidden lines.
Machine is for cutting, roughing, and brushing metal and stone materials without water.
Lists and describes the numbered parts of the machine.
Provides technical specifications for PWS 10-125 CE and PWS 13-125 CE models.
Details measured sound and vibration levels according to EN 60745.
Instructions for fitting protection guards for grinding and cutting.
Guidance on mounting and using the auxiliary handle for safe operation.
Instructions for mounting the hand guard for specific accessories.
Procedures for attaching grinding and cutting discs safely.
Instructions for mounting cup and disc brushes with hand guard.
How to use and install the SDS-clic quick-clamping nut for tool changes.
Information on compatible grinding tools and their speed requirements.
How to rotate the machine head for better ergonomics or specific tasks.
Health hazards of dust and recommendations for dust extraction.
How to start and stop the power tool safely, including voltage checks.
Ensure grinding tools are properly mounted, undamaged, and run freely.
Features like reduced starting current, constant electronic control, and speed preselection.
Guidance on rough grinding, using flap discs, cutting metal, and general operation tips.
Instructions for cutting stone, including dust extraction and disc recommendations.
Warnings regarding cutting slots in structural walls and related regulations.
Procedures for cleaning and maintaining the tool and ventilation slots.
Information on obtaining repairs, spare parts, and customer support.
