To Next PageTo Next Page
Need help?Do you have a question about the Bosch PWS 680-115 and is the answer not in the manual?
General| Power | 680 W |
|---|---|
| Disc diameter | 115 mm |
| No-load speed | 11000 rpm |
| Weight | 1.9 kg |
| Spindle thread | M14 |
| Cable length | 2.5 m |
Provides essential safety warnings and instructions for general power tool operation.
Guidelines for maintaining a safe and hazard-free work environment.
Details electrical safety precautions to prevent shock and hazards.
Advises on personal protective equipment and maintaining alertness.
Ensures the tool is off before connecting power or picking it up to avoid accidental starts.
Reminds users to remove tools before operation to prevent injury.
Emphasizes maintaining proper footing and balance for better control.
Advises against loose clothing, jewelry, and long hair near moving parts.
Highlights the use of dust extraction facilities to reduce hazards.
Recommends using the correct tool for the application for better performance and safety.
Stresses the danger of tools with faulty switches and the need for repair.
Advises disconnecting power before adjustments or accessory changes.
Recommends storing tools out of reach of children and untrained users.
Guides on checking for damage and ensuring proper repair for safe operation.
Emphasizes the benefits of sharp, clean tools for control and reduced binding.
Ensures tools are used as intended, considering working conditions and applications.
Recommends professional servicing with identical replacement parts to maintain safety.
Covers general safety for various abrasive operations performed with the tool.
Warns against using the tool for operations it was not designed for, like polishing.
Stresses using manufacturer-recommended accessories for safe operation.
Ensures accessory speed rating meets or exceeds tool speed for safety.
Highlights the importance of accessory dimensions matching tool capacity for safety.
Ensures correct spindle thread and flange fit for accessory mounting and balance.
Advises inspecting accessories for damage before each use and performing a test run.
Details essential PPE like face shields, goggles, masks, and gloves for various operations.
Ensures bystanders maintain a safe distance and wear PPE due to potential fragments.
Recommends supporting large workpieces to minimize pinching and kickback risks.
Warns about potential hazards like cutting pipes or wires in blind areas.
Advises using correct size sanding paper to prevent hazards like laceration or snagging.
Warns about thrown bristles and potential skin penetration.
Ensures brush does not interfere with the guard due to expansion.
Mandatory instruction to wear safety goggles during operation.
Advises checking for hidden utility lines to prevent fire, shock, or explosion hazards.
Instructs to switch off the tool during power interruptions to prevent accidental restarting.
Warns that discs can become very hot during use and require cooling.
Recommends clamping workpieces for secure handling during operations.
Defines the intended applications for the angle grinder, including cutting and roughing.
Lists and identifies the key features and components of the angle grinder.
Presents sound level data for various models measured according to EN 60745.
Details vibration levels for surface grinding and disk sanding operations.
Explains how vibration levels are measured and how to interpret the data.
Provides detailed technical specifications for various PWS angle grinder models.
Presents technical specifications for a different range of PWS angle grinder models.
Lists technical specifications for the higher-end PWS angle grinder models.
Instructions for correctly fitting the protective guard for safe operation.
Details the procedure for mounting and adjusting the grinding protection guard.
Explains how to mount the protection guard for cutting operations.
Instructions for mounting the cutting guide with dust extraction guard.
Guidance on fitting and positioning the auxiliary handle for optimal use.
Instructions for mounting the hand guard when using specific accessories.
Details on mounting grinding and cutting discs, including spindle lock and tightening.
Specific instructions for mounting a flap disc, including hand guard use.
Instructions for mounting the rubber sanding plate and tightening with a spanner.
Guidance on mounting cup brushes or disc brushes and tightening them.
Information on approved tools and their permissible speeds for safe operation.
Details on rotating the machine head for specific models and user preferences.
Instructions on checking voltage and preparing the tool for initial startup.
Explains how to use the On/Off switch, including locking it in the 'on' position.
Advises inspecting grinding tools for proper mounting and condition before use.
Warns about potential hazards when cutting into structural elements.
Ensures workpieces are secured to prevent movement during operation.
Advises against overloading the machine to prevent damage or overheating.
Recommends running the tool without load to cool down the accessory after heavy use.
Warns that discs can become very hot during use and require cooling.
Prohibits using the tool with a cut-off stand attachment.
Warns against using cutting discs for roughing operations, which is improper use.
Details how to use flap discs for working with curved surfaces and profiles.
Mandates using the correct protection guard for cutting with bonded abrasive discs.
Advises against using side pressure to slow down cutting discs, which can cause damage.
Emphasizes the need for dust extraction when cutting stone materials.
Recommends wearing a dust respirator for protection against stone dust.
Specifies that the tool is for dry operations only, not wet cutting/grinding.
Suggests starting cuts on the smallest cross section for profiles and square bars.
Instructs on the correct cutting motion to prevent uncontrolled tool ejection.
Instructions for cleaning and maintaining the tool and its ventilation slots.
Emphasizes the importance of a clean tool and ventilation slots for safe operation.
Recommends dust extraction and RCD use in extreme conditions for safety.
Advises careful handling and storage of accessories.
Specifies that cord replacement must be done by qualified personnel to avoid hazards.
