To Next PageTo Next Page
Need help?Do you have a question about the Bosch PWS 720-115 and is the answer not in the manual?
General| Idle speed (max) | 11000 RPM |
|---|---|
| Grinding disc diameter | 115 mm |
| Soft grip | Yes |
| Input power | 720 W |
| Output power | 360 W |
| Power source | AC |
| AC input voltage | 230 V |
Weight and Dimensions| Weight | 1900 g |
|---|
Keep work area clean, avoid explosive atmospheres, keep children and bystanders away.
Match plugs to outlets, avoid body contact with earthed surfaces, protect from rain/wet, do not abuse cord.
Stay alert, wear PPE, prevent unintentional starting, remove keys, proper footing, dress properly.
Use correct tool for application, avoid forcing, ensure switch works, disconnect power before adjustments.
Store idle tools safely, maintain tools, keep cutting tools sharp, follow instructions for use.
Read warnings, use recommended accessories, match accessory speed to tool, do not polish.
Understand kickback causes (pinched/snagged wheel) and how to avoid it through precautions.
Use recommended wheels and guards, maintain firm grip, avoid corners/sharp edges, do not use saw blades.
Do not jam wheel, avoid excessive pressure, do not position body in line with wheel.
Do not use excessively oversized sanding paper; follow manufacturer recommendations.
Be aware of thrown bristles, do not overstress wires, ensure guard compatibility.
Use safety goggles, detect utility lines, release switch during power interruption, use dust extraction.
List and description of numbered product features like levers, buttons, guards, and accessories.
Table detailing article number, power input, output, speed, disc diameter, weight, and protection class.
Instructions for mounting protection guards for sanding and cutting.
How to mount and adjust protection guards for sanding and cutting operations.
Operate machine with auxiliary handle, position it correctly, use vibration-dampening type.
Disconnect power, clean spindle, lock spindle, use correct tools for assembly.
Instructions for mounting grinding discs, flap discs, sanding plates, cup brushes, and disc brushes.
Ensure grinding tool speed matches or exceeds tool speed rating.
Use dust extraction for harmful dusts, ensure ventilation, wear respirator.
Observe correct mains voltage, check generator suitability, start tool by pushing switch.
How to start, lock, and stop the power tool using the On/Off switch.
Exercise caution, clamp workpieces, avoid straining the machine, allow tools to cool.
Use cutting disc only for cutting, set angle for roughing, move back and forth.
Use cutting guard, adapt feed, avoid tilting, use up-grinding motion for safety.
Use diamond disc and dust extraction guard, operate with dust extraction, wear mask.
Observe DIN standards and regulations for slots in structural walls; consult experts.
Keep machine clean, blow out slots, use extraction for metal dust, handle accessories carefully.
Repair by after-sales service, include article number in all correspondence.
Contact details for service, repair, spare parts, and product advice in various regions.
Sort machine, accessories, and packaging for recycling; do not dispose of power tools in household waste.
