To Next PageTo Next Page
Need help?Do you have a question about the Bosch PWS 13-125 CE and is the answer not in the manual?
General| Idle speed (max) | 11000 RPM |
|---|---|
| Grinding disc diameter | 125 mm |
| Input power | 1300 W |
| Output power | 740 W |
| Power source | AC |
| Product color | Black, Green, Silver |
Weight and Dimensions| Weight | 2300 g |
|---|
Read all warnings and instructions. Failure to follow may result in shock, fire, or injury.
Keep work area clean, well-lit, and free from distractions. Avoid explosive atmospheres.
Match plugs to outlets, avoid earthed surfaces, and do not expose tools to rain or wet conditions.
Stay alert, use PPE, prevent unintentional starting, maintain balance, and dress properly.
Do not force the tool, use the correct tool, maintain it, and store it safely away from children.
Have tools serviced by qualified personnel using identical replacement parts.
Use recommended accessories, check accessory speed/size, and avoid unsuitable operations.
Understand kickback, maintain a firm grip, position body correctly, and keep hands away from accessories.
Use correct guards, wheels, and flanges. Avoid jamming, excessive pressure, or incorrect positioning.
Avoid oversized sanding discs, be aware of wire bristles, and use appropriate guards.
Wear safety goggles, use utility detectors, release switch on power interruption, use dust extraction.
Machine for cutting, roughing, brushing metal/stone without water. Special guards needed for cutting.
Lists numbered product features corresponding to the illustration on the graphics page.
Provides technical specifications for PWS 10-125 CE and PWS 13-125 CE models.
Details measured noise and vibration levels. Recommends wearing hearing protection.
Statement of conformity with relevant EU directives and standards.
Instructions for installing protective guards before operating the machine.
How to mount and adjust protection guards for grinding and cutting operations.
Instructions for mounting the extraction hood for low-dust sanding.
Mounting the vibration-dampening auxiliary handle and hand guard for specific accessories.
Steps for mounting grinding tools, including spindle lock and cleaning.
Proper mounting of grinding/cutting discs, flap discs, sanding plates, and brushes.
How to use the SDS-clic quick-clamping nut for fast tool changes.
Lists approved grinding tools and their required permissible speeds.
Importance of dust extraction for health and safety, especially with hazardous materials.
Observe mains voltage, generator suitability, and how to start, stop, and lock the switch.
Procedure to rotate the machine head for better positioning during specific tasks.
How to preselect speed and information on reduced starting current and constant electronic control.
Tips for rough grinding, using flap discs, and working with structural walls.
Use cutting guard, moderate feed, avoid disc overheating and excessive pressure.
Use cutting guide, diamond disc, dust extraction, and up-grinding motion for stone.
Regulations for slots in structural walls; consult engineers before work.
Keep machine and ventilation slots clean. Use extraction for metal dust.
Contact information for maintenance, repair, and spare parts orders.
Instructions for environmentally friendly recycling of the machine and accessories.
