To Next PageTo Next Page
Need help?Do you have a question about the Bosch PWS 750-125 and is the answer not in the manual?
General| Idle speed (max) | 11000 RPM |
|---|---|
| Grinding disc diameter | 125 mm |
| Soft grip | Yes |
| Input power | 750 W |
| Output power | 450 W |
| Power source | AC |
| AC input voltage | 230 V |
Weight and Dimensions| Weight | 1900 g |
|---|
Ensures a clean, well-lit environment, avoiding explosive atmospheres and keeping bystanders clear.
Covers proper connections, avoiding grounded surfaces, keeping dry, and cord care to prevent shock.
Emphasizes alertness, PPE, preventing accidental starts, tool removal, balance, and proper attire.
Use outdoor-suitable extension cords and RCDs for damp locations to mitigate electric shock risk.
Focuses on alertness, PPE, preventing unintentional start-up, and proper attire for safe operation.
Use recommended accessories, check speed, diameter, and arbor fit for safe grinding and sanding.
Inspect accessories, use PPE, keep bystanders clear, hold by insulated surfaces, and manage cords.
Understand kickback causes (pinching/snagging) and how to avoid it through proper technique and precautions.
Maintain firm grip, avoid placing hands near accessory, position body away from kickback path, use care on corners/edges.
Use correct guards and wheels. Ensure guard attachment and positioning. Use wheels for recommended applications only.
Avoid jamming or excessive pressure. Do not make excessive cuts. Interrupt cutting when wheel binds.
Support workpieces, use caution in blind cuts, avoid oversized sanding paper, and be aware of wire bristles.
Detect utility lines, release switch during power interruption, use dust extraction for stone, and secure workpiece.
Hold tool firmly, keep workplace clean, and never use a damaged cable for safety.
Step-by-step guide for attaching and adjusting the protection guard for sanding operations.
Instructions for mounting the cutting guard, auxiliary handle, and vibration-dampening handle.
Mounting the hand guard and various grinding tools like flap discs, sanding plates, and brushes.
Guidance on checking voltage, starting, locking, and switching the power tool on and off correctly.
Tips for safe operation, checking grinding tools, and handling the machine during use.
Methods for rough grinding, using flap discs, cutting metal, and cutting stone safely.
Considerations for cutting slots in structural walls according to applicable standards.
Instructions for keeping the machine clean, ventilation slots clear, and handling accessories carefully.
Information on obtaining service, repairs, and spare parts from Bosch customer support.
